The Business Process Language (BPL) is a language used to describe executable business processes within a standard XML document. BPL syntax is based on several of the proposed XML standards for defining business process logic. A BPL business process class is derived from Ens.BusinessProcessBPL
. It is identical in every way to a class derived from Ens.BusinessProcess
, except that it supports BPL.
When you navigate to the Business Process Designer
page in the Management Portal, it opens with the last business process you worked on in this namespace. The tab at the left of the title bar contains the name of the BPL class. You can also choose to work on a different business process in one of the following ways:
Using the Business Process Wizard
The Business Process Wizard
enables you to quickly create a BPL business process class inherited from Ens.BusinessProcessBPL
. It provides the following dialog where you can define the preliminary characteristics of your BPL business process.
Enter values for the following fields:
Enter a package name to contain the business process class or select from a list of packages in the namespace.
Enter a name for your BPL business process class.
Enter a description for the data transformation; this becomes the class description.
When you complete the wizard by clicking
, the start and end points of the BPL diagram display in the Business Process Designer
, ready for you to add activities to your BPL business process.
The [Interoperability] > [Business Process List]
page displays a list of business process classes defined in the active production-enabled namespace. To navigate to this page in the Management Portal, click Interoperability
, click List
, and then click
BPL business processes are displayed in blue; you can double-click one to open it in the Business Process Designer
. Business processes displayed in black are custom classes you must edit in Studio.
You can select a business process class to be the target of one of the following commands in the ribbon bar:
Click this to launch the Business Process Wizard, discussed earlier in this chapter.
Click to export the selected business process class to an XML file.
Click to import a business process that was exported to an XML file.
Click to delete the selected business process class.
Click to list any current instances of the business process in the running production. If a business process has completed its work, there is no entry for it on this page.
Click to view the business rule log for rules invoked by this business process.
You can also export and import business process classes as you do any other class in InterSystems IRIS. You can use the [Home] > [Classes]
page of the Management Portal or use the
commands on the
menu in Studio.
BPL is a language used to describe executable business processes within a standard XML document. BPL syntax is based on several of the proposed XML standards for defining business process logic, including the Business Process Execution Language for Web Services (BPEL4WS or BPEL) and the Business Process Management Language (BPML or BPMI).
BPL is a superset of other proposed XML-based standards, in that it provides additional elements whose purpose is to help you build integration solutions. These additional elements include support for the following:
Generation of executable code from business process logic.
Embedding SQL and custom-written code into the business process logic.
The Business Process Designer
, a full-featured, visual modeling tool for graphically viewing and editing business process logic. This tool includes complete round-trip engineering between the visual and BPL representations of the business process. Changes to one representation are automatically reflected in the other.
Automatic support for both asynchronous and synchronous messaging between business processes and other members of an integration solution. BPL streamlines this difficult and error-prone programming task.
Persistent state. BPL permits a long-running business process to automatically suspend execution and efficiently save its execution state to a built-in, persistent cache whenever it is inactive; for example, when it is waiting for an asynchronous response. InterSystems IRIS automatically manages all state preservation and the ability to smoothly resume processing.
Rich and varied data transformation services, including SQL queries embedded within the business process.
You can create a BPL business process using the Management Portal or Studio. The recommended way is to use the Business Process Wizard
from the [Interoperability] > [Business Process Designer]
page of the Management Portal. See later chapters of this book for details.
Using a Business Process as a Component
A business process component
or BPL component
is a BPL business process that a programmer wishes to identify as a modular, reusable sequence of steps in the BPL language. A BPL component is analogous to a function, macro, or subroutine in other programming languages.
Only another BPL business process can call a BPL component. It does this using the BPL <call>
element. The BPL business process component performs tasks, then returns control to the BPL business process that called it.
The production architecture already allows one BPL business process to call another BPL business process. The optional component
designation simply provides convenience. It allows you to classify certain BPL business processes as simpler, lower-level components that:
Are not intended to run as stand-alone business processes (although nothing in the architecture prevents this)
May be reusable (in the sense of a function, macro, or subroutine in the BPL language)
Business processes that are not components are assumed to have more complex, special-purpose designs, and to operate at a higher conceptual level than components. It is expected that BPL non-components call BPL components to accomplish tasks.
There is no requirement that you use the component designation for any BPL business process. It is available as a convenience for any BPL programmer who prefers it.
To set the value of the component
attribute, you can do either of the following:
Business Process Execution Context
The life cycle of a business process requires it to have certain state information saved to disk and restored from disk, whenever the business process suspends or resumes execution. This feature is especially important for long-running business processes, which may take days or weeks to complete.
A BPL business process supports the business process life cycle with a group of variables known as the execution context
. InterSystems IRIS automatically save the variables in the execution context and restores them each time the BPL business process suspends and resumes execution. These variables are available to every BPL business process; that is, to every business process class that inherits from Ens.BusinessProcessBPL
Custom business processes that inherit from Ens.BusinessProcess
do not have access to a built-in execution context and must handle similar issues using custom code.
Some of the execution context variables are available to every activity within a BPL business process. Others are generally available, but go in and out of scope, depending on the type of activity that the business process is executing at the time. The following topics describe the execution context variables and when they are available to a BPL business process. The variables are:
Once you have defined properties on the context
object, you can refer to them anywhere in BPL using ordinary dot syntax and the property name, as in: context.MyData
object contains the properties that were in the original request message object the incoming message that first caused this business process to be instantiated. This is known as the primary request
object contains the properties that are required to build the final response message object to be returned by this business process instance. The business process returns this final response either when it reaches the end of its life cycle, or when it encounters a <reply>
object is available to a BPL business process anywhere inside the <process>
element. You can refer to the properties of the response
object using dot syntax and the parameter name, as in: response.BottomLine
object contains any properties that are required to build the request message object to be sent by a <call>
A <call> activity sends a request message and, optionally, receives a response. A BPL <call> element must include a <request>
activity to put values into the properties on the request message object. In order to accomplish this, the <request> provides a sequence of <assign>
activities that place values into properties on the callrequest
object. Typically, some of these values are derived from properties on the original request
object, but you are free to assign any value.
As soon as the <assign> activities inside the <request> are completed, the message is sent, and the associated callrequest
object goes out of scope. callrequest
has no meaning outside its associated <request> activity; it is already out of scope when the associated <call> begins processing its next activity, the optional <response>.
Upon completion of a <call> activity, the callresponse
object contains the properties of the response message object that was returned to the <call>
. If the <call> was designed with no response, there is no callresponse
. Similarly, if you use <sync>
to wait for a response, but the response does not return within the timeout period specified by the <sync>
element, there is no callresponse
Every <call> that expects a response must provide a <response>
activity within the <call>. The purpose of the <response> activity is to retrieve the response values and make them available to the business process as a whole. The callresponse
object is available anywhere inside the <response> activity. However, as soon as the <response> activity completes, the associated callresponse
object goes out of scope. Therefore, if you want to use the values in callresponse
elsewhere in the business process, you must <assign>
these values to properties on the context
objects, and you must do so before the end of the <response> activity in which they were received.
The syncresponses Collection
When a <sync>
activity begins, syncresponses
is cleared in preparation for new responses. As the <call>
activities return, responses go into the collection. When the <sync> activity completes, syncresponses
may contain all, some, or none of the desired responses (see synctimedout
is available anywhere inside the <sequence>
that contains the relevant <call> and <sync> activities, but goes out of scope outside that <sequence>.
If 0, no call timed out. All the calls had time to complete. This is also the value if the <sync> activity had no timeout
If 1, at least one call timed out. This means not all <call>
activities completed before the timeout.
If 2, at least one call was interrupted before it could complete.
is available to a BPL business process anywhere inside the <sequence> that contains the relevant <call> and <sync> activities, but goes out of scope outside that <sequence>. Generally you will test synctimedout
for status and then retrieve the responses from completed calls out of the syncresponses
collection. You can refer to synctimedout
with the same syntax as for any integer variable name, that is: synctimedout
Error handling for a BPL business process happens automatically without your ever needing to test or set the status
value in the BPL source code. The status
value is documented here in case you need to trigger a BPL business process to exit under certain special conditions.
When a BPL business process starts up, status
is automatically assigned a value indicating success. To test that status
has a success value, you can use the macro $$$ISOK(status)
in ObjectScript. If the test returns a True value, status
has a success value.
As the BPL business process runs, if at any time status
acquires a failure value, InterSystems IRIS immediately terminates the business process and writes the corresponding text message to the Event Log. This happens regardless of how status
acquired the failure value. Thus, the best way to cause a BPL business process to exit suddenly, but gracefully is to set status
to a failure value.
can acquire a failure value in any of the following ways:
automatically receives the returned %Status
value from any <call>
that the business process makes to another business host. If the value of this %Status
indicates failure, status
automatically receives the failure value. This is the most common way in which status
is set, and it happens automatically, without any special statements in the BPL code.
activity can set status
to a failure value. The usual convention for doing this is to use an <if>
element to test the result of some prior activity, and then within the <true> or <false> element use <assign> to set status
to a failure value when failure conditions exist.
Statements within a <code>
activity can set status
to a failure value. The BPL business process does not perceive the change in the value of status
until the <code> activity has fully completed. Therefore, if you want a failure status
to cause an immediate exit from a <code> activity, you must place a quit command in the <code> activity immediately after setting a failure value for status
To test that status
has a failure value, use the macro $$$ISERR(status)
in ObjectScript. If the test returns a True value, status
has a failure value. You will be able to perform this test only within the body of a <code> activity before it returns to the main BPL business process, since the business process will automatically quit with an error as soon as it detects that status
has acquired a failure value following any <call>, <assign>, or <code> activity.
Like all other execution context variable names, status
is a reserved word in BPL. Do not use it except as described in this topic.
object represents the current instance of the BPL business process object. The process
object is provided so that you can invoke any business process method, such as SendRequestSync()
, from any context within the flow of the BPL business process, for example from within the text block of a <code>
BPL Business Process Example
In the following business process, three different banks can be consulted for prime rate and credit approval information.
/// Loan Approval Business Process for Bank Soprano.
/// Bank Soprano simulates a bank with great service but
/// somewhat high interest rates.
Class Demo.Loan.BankSoprano Extends Ens.BusinessProcessBPL
<property name="CreditRating" type="%Integer"/>
<property name="PrimeRate" type="%Numeric"/>
<trace value='"received application for "_request.Name'/>
<assign name='Init Response'
<![CDATA[Initialize the response object.]]>
<![CDATA[Send an asynchronous request for the Prime Rate.]]>
<![CDATA[Send an asynchronous request for the Credit Rating.]]>
<assign property="callrequest.TaxID" value='request.TaxID'/>
<![CDATA[Wait for the response from the async requests.
Wait for up to 10 seconds.]]>
<case name='No PrimeRate'
<assign name='Not Approved'
<case name='No Credit'
<assign name='Not Approved'
<default name='Approved' >
<![CDATA[Copy InterestRate into response object.]]>
<![CDATA[Wait for a random duration.]]>
<trace value='"application is "
_$s(response.IsApproved:"approved for "_response.InterestRate_"%",