%ZEN.Report.Display.document
class %ZEN.Report.Display.document extends %ZEN.Report.Display.childrenNode
The <document> tag is used at the top-level to specify dimensions and styling for the report. The dimensions only affect the PDF report.Property Inventory
- columnCount
- columnGap
- endSidebarLength
- footerHeight
- headerHeight
- height
- ifexpression
- ifxpath
- margin
- marginBottom
- marginLeft
- marginRight
- marginTop
- orientation
- referenceOrientation
- regionAfter
- regionAfterColor
- regionAfterDisplayAlign
- regionAfterExtent
- regionAfterName
- regionAfterOrientation
- regionBefore
- regionBeforeColor
- regionBeforeDisplayAlign
- regionBeforeExtent
- regionBeforeName
- regionBeforeOrientation
- regionEnd
- regionEndColor
- regionEndDisplayAlign
- regionEndExtent
- regionEndName
- regionEndOrientation
- regionStart
- regionStartColor
- regionStartDisplayAlign
- regionStartExtent
- regionStartName
- regionStartOrientation
- size
- startSidebarLength
- width
- writingMode
- writingModeRegionAfter
- writingModeRegionBefore
- writingModeRegionBody
- writingModeRegionEnd
- writingModeRegionStart
Method Inventory
Properties
property columnCount as %ZEN.Datatype.integer (XMLNAME = "column-count");
specifies that the fo:region-body is multicolumn. The column-count property indicates the number of columns on every page instance formatted using the simple-page-master
to which this region-body belongs.
Property methods: columnCountDisplayToLogical(), columnCountGet(), columnCountIsValid(), columnCountLogicalToDisplay(), columnCountLogicalToOdbc(), columnCountNormalize(), columnCountSet()
property columnGap as %ZEN.Datatype.length (XMLNAME = "column-gap");
If column-count is greater than 1, a value may be specified for the column-gap property. The value is either an explicit length or a percentage
of the inline-progression-dimension of the content rectangle of the region-body.
Property methods: columnGapDisplayToLogical(), columnGapGet(), columnGapIsValid(), columnGapLogicalToDisplay(), columnGapLogicalToOdbc(), columnGapNormalize(), columnGapSet()
property endSidebarLength as %ZEN.Datatype.length [ InitialExpression = "0" ];
Specifies the amount of room available for the contents of the <endsidebar> tag.
Property methods: endSidebarLengthDisplayToLogical(), endSidebarLengthGet(), endSidebarLengthIsValid(), endSidebarLengthLogicalToDisplay(), endSidebarLengthLogicalToOdbc(), endSidebarLengthNormalize(), endSidebarLengthSet()
Specifies the amount of room available for the contents of the <pagefooter> tag.
Property methods: footerHeightDisplayToLogical(), footerHeightGet(), footerHeightIsValid(), footerHeightLogicalToDisplay(), footerHeightLogicalToOdbc(), footerHeightNormalize(), footerHeightSet()
property headerHeight as %ZEN.Datatype.length [ InitialExpression = "0" ];
Specifies the amount of room available for the contents of the <pageheader> tag.
Property methods: headerHeightDisplayToLogical(), headerHeightGet(), headerHeightIsValid(), headerHeightLogicalToDisplay(), headerHeightLogicalToOdbc(), headerHeightNormalize(), headerHeightSet()
property height as %ZEN.Datatype.length [ InitialExpression = "11in" ];
Specifies the height of the document.
Property methods: heightDisplayToLogical(), heightGet(), heightIsValid(), heightLogicalToDisplay(), heightLogicalToOdbc(), heightNormalize(), heightSet()
property ifexpression as %ZEN.Datatype.string (XMLPROJECTION = "NONE");
Property methods: ifexpressionDisplayToLogical(), ifexpressionGet(), ifexpressionIsValid(), ifexpressionLogicalToDisplay(), ifexpressionLogicalToOdbc(), ifexpressionNormalize(), ifexpressionSet()
property ifxpath as %ZEN.Datatype.string (XMLPROJECTION = "NONE");
Property methods: ifxpathDisplayToLogical(), ifxpathGet(), ifxpathIsValid(), ifxpathLogicalToDisplay(), ifxpathLogicalToOdbc(), ifxpathNormalize(), ifxpathSet()
property margin as %ZEN.Datatype.string;
margin attribute on fo:simple-page-master
Property methods: marginDisplayToLogical(), marginGet(), marginIsValid(), marginLogicalToDisplay(), marginLogicalToOdbc(), marginNormalize(), marginSet()
property marginBottom as %ZEN.Datatype.length [ InitialExpression = "1in" ];
Specifies the bottom margin of the document. This does not include the
space left for the footer.
Property methods: marginBottomDisplayToLogical(), marginBottomGet(), marginBottomIsValid(), marginBottomLogicalToDisplay(), marginBottomLogicalToOdbc(), marginBottomNormalize(), marginBottomSet()
property marginLeft as %ZEN.Datatype.length [ InitialExpression = "1.25in" ];
Specifies the left margin width of the document.
Property methods: marginLeftDisplayToLogical(), marginLeftGet(), marginLeftIsValid(), marginLeftLogicalToDisplay(), marginLeftLogicalToOdbc(), marginLeftNormalize(), marginLeftSet()
property marginRight as %ZEN.Datatype.length [ InitialExpression = "1.25in" ];
Specifies the right margin width of the document.
Property methods: marginRightDisplayToLogical(), marginRightGet(), marginRightIsValid(), marginRightLogicalToDisplay(), marginRightLogicalToOdbc(), marginRightNormalize(), marginRightSet()
property marginTop as %ZEN.Datatype.length [ InitialExpression = "1in" ];
Specifies the top margin of the document. This does not include the
space left for the header.
Property methods: marginTopDisplayToLogical(), marginTopGet(), marginTopIsValid(), marginTopLogicalToDisplay(), marginTopLogicalToOdbc(), marginTopNormalize(), marginTopSet()
property orientation as %ZEN.Datatype.string (VALUELIST = ",portrait,landscape,none") [ InitialExpression = "portrait" ];
Property methods: orientationDisplayToLogical(), orientationGet(), orientationIsValid(), orientationLogicalToDisplay(), orientationLogicalToOdbc(), orientationNormalize(), orientationSet()
property referenceOrientation as %ZEN.Datatype.integer;
value of reference-orientation in XSL-FO region-body
Property methods: referenceOrientationDisplayToLogical(), referenceOrientationGet(), referenceOrientationIsValid(), referenceOrientationLogicalToDisplay(), referenceOrientationLogicalToOdbc(), referenceOrientationNormalize(), referenceOrientationSet()
property regionAfter as %ZEN.Datatype.string;
Property methods: regionAfterDisplayToLogical(), regionAfterGet(), regionAfterIsValid(), regionAfterLogicalToDisplay(), regionAfterLogicalToOdbc(), regionAfterNormalize(), regionAfterSet()
property regionAfterColor as %ZEN.Datatype.string;
Property methods: regionAfterColorDisplayToLogical(), regionAfterColorGet(), regionAfterColorIsValid(), regionAfterColorLogicalToDisplay(), regionAfterColorLogicalToOdbc(), regionAfterColorNormalize(), regionAfterColorSet()
property regionAfterDisplayAlign as %ZEN.Datatype.string [ InitialExpression = "after" ];
Property methods: regionAfterDisplayAlignDisplayToLogical(), regionAfterDisplayAlignGet(), regionAfterDisplayAlignIsValid(), regionAfterDisplayAlignLogicalToDisplay(), regionAfterDisplayAlignLogicalToOdbc(), regionAfterDisplayAlignNormalize(), regionAfterDisplayAlignSet()
property regionAfterExtent as %ZEN.Datatype.string;
Property methods: regionAfterExtentDisplayToLogical(), regionAfterExtentGet(), regionAfterExtentIsValid(), regionAfterExtentLogicalToDisplay(), regionAfterExtentLogicalToOdbc(), regionAfterExtentNormalize(), regionAfterExtentSet()
property regionAfterName as %ZEN.Datatype.string;
Property methods: regionAfterNameDisplayToLogical(), regionAfterNameGet(), regionAfterNameIsValid(), regionAfterNameLogicalToDisplay(), regionAfterNameLogicalToOdbc(), regionAfterNameNormalize(), regionAfterNameSet()
property regionAfterOrientation as %ZEN.Datatype.integer [ InitialExpression = 0 ];
Property methods: regionAfterOrientationDisplayToLogical(), regionAfterOrientationGet(), regionAfterOrientationIsValid(), regionAfterOrientationLogicalToDisplay(), regionAfterOrientationLogicalToOdbc(), regionAfterOrientationNormalize(), regionAfterOrientationSet()
property regionBefore as %ZEN.Datatype.string;
Property methods: regionBeforeDisplayToLogical(), regionBeforeGet(), regionBeforeIsValid(), regionBeforeLogicalToDisplay(), regionBeforeLogicalToOdbc(), regionBeforeNormalize(), regionBeforeSet()
property regionBeforeColor as %ZEN.Datatype.string;
Property methods: regionBeforeColorDisplayToLogical(), regionBeforeColorGet(), regionBeforeColorIsValid(), regionBeforeColorLogicalToDisplay(), regionBeforeColorLogicalToOdbc(), regionBeforeColorNormalize(), regionBeforeColorSet()
property regionBeforeDisplayAlign as %ZEN.Datatype.string [ InitialExpression = "inherit" ];
Property methods: regionBeforeDisplayAlignDisplayToLogical(), regionBeforeDisplayAlignGet(), regionBeforeDisplayAlignIsValid(), regionBeforeDisplayAlignLogicalToDisplay(), regionBeforeDisplayAlignLogicalToOdbc(), regionBeforeDisplayAlignNormalize(), regionBeforeDisplayAlignSet()
property regionBeforeExtent as %ZEN.Datatype.string;
Property methods: regionBeforeExtentDisplayToLogical(), regionBeforeExtentGet(), regionBeforeExtentIsValid(), regionBeforeExtentLogicalToDisplay(), regionBeforeExtentLogicalToOdbc(), regionBeforeExtentNormalize(), regionBeforeExtentSet()
property regionBeforeName as %ZEN.Datatype.string;
Property methods: regionBeforeNameDisplayToLogical(), regionBeforeNameGet(), regionBeforeNameIsValid(), regionBeforeNameLogicalToDisplay(), regionBeforeNameLogicalToOdbc(), regionBeforeNameNormalize(), regionBeforeNameSet()
property regionBeforeOrientation as %ZEN.Datatype.integer [ InitialExpression = 0 ];
Property methods: regionBeforeOrientationDisplayToLogical(), regionBeforeOrientationGet(), regionBeforeOrientationIsValid(), regionBeforeOrientationLogicalToDisplay(), regionBeforeOrientationLogicalToOdbc(), regionBeforeOrientationNormalize(), regionBeforeOrientationSet()
property regionEnd as %ZEN.Datatype.string;
Property methods: regionEndDisplayToLogical(), regionEndGet(), regionEndIsValid(), regionEndLogicalToDisplay(), regionEndLogicalToOdbc(), regionEndNormalize(), regionEndSet()
property regionEndColor as %ZEN.Datatype.string;
Property methods: regionEndColorDisplayToLogical(), regionEndColorGet(), regionEndColorIsValid(), regionEndColorLogicalToDisplay(), regionEndColorLogicalToOdbc(), regionEndColorNormalize(), regionEndColorSet()
property regionEndDisplayAlign as %ZEN.Datatype.string [ InitialExpression = "after" ];
Property methods: regionEndDisplayAlignDisplayToLogical(), regionEndDisplayAlignGet(), regionEndDisplayAlignIsValid(), regionEndDisplayAlignLogicalToDisplay(), regionEndDisplayAlignLogicalToOdbc(), regionEndDisplayAlignNormalize(), regionEndDisplayAlignSet()
property regionEndExtent as %ZEN.Datatype.string;
Property methods: regionEndExtentDisplayToLogical(), regionEndExtentGet(), regionEndExtentIsValid(), regionEndExtentLogicalToDisplay(), regionEndExtentLogicalToOdbc(), regionEndExtentNormalize(), regionEndExtentSet()
property regionEndName as %ZEN.Datatype.string;
Property methods: regionEndNameDisplayToLogical(), regionEndNameGet(), regionEndNameIsValid(), regionEndNameLogicalToDisplay(), regionEndNameLogicalToOdbc(), regionEndNameNormalize(), regionEndNameSet()
property regionEndOrientation as %ZEN.Datatype.integer [ InitialExpression = 0 ];
Property methods: regionEndOrientationDisplayToLogical(), regionEndOrientationGet(), regionEndOrientationIsValid(), regionEndOrientationLogicalToDisplay(), regionEndOrientationLogicalToOdbc(), regionEndOrientationNormalize(), regionEndOrientationSet()
property regionStart as %ZEN.Datatype.string;
Property methods: regionStartDisplayToLogical(), regionStartGet(), regionStartIsValid(), regionStartLogicalToDisplay(), regionStartLogicalToOdbc(), regionStartNormalize(), regionStartSet()
property regionStartColor as %ZEN.Datatype.string;
Property methods: regionStartColorDisplayToLogical(), regionStartColorGet(), regionStartColorIsValid(), regionStartColorLogicalToDisplay(), regionStartColorLogicalToOdbc(), regionStartColorNormalize(), regionStartColorSet()
property regionStartDisplayAlign as %ZEN.Datatype.string [ InitialExpression = "inherit" ];
Property methods: regionStartDisplayAlignDisplayToLogical(), regionStartDisplayAlignGet(), regionStartDisplayAlignIsValid(), regionStartDisplayAlignLogicalToDisplay(), regionStartDisplayAlignLogicalToOdbc(), regionStartDisplayAlignNormalize(), regionStartDisplayAlignSet()
property regionStartExtent as %ZEN.Datatype.string;
Property methods: regionStartExtentDisplayToLogical(), regionStartExtentGet(), regionStartExtentIsValid(), regionStartExtentLogicalToDisplay(), regionStartExtentLogicalToOdbc(), regionStartExtentNormalize(), regionStartExtentSet()
property regionStartName as %ZEN.Datatype.string;
Property methods: regionStartNameDisplayToLogical(), regionStartNameGet(), regionStartNameIsValid(), regionStartNameLogicalToDisplay(), regionStartNameLogicalToOdbc(), regionStartNameNormalize(), regionStartNameSet()
property regionStartOrientation as %ZEN.Datatype.integer [ InitialExpression = 0 ];
Property methods: regionStartOrientationDisplayToLogical(), regionStartOrientationGet(), regionStartOrientationIsValid(), regionStartOrientationLogicalToDisplay(), regionStartOrientationLogicalToOdbc(), regionStartOrientationNormalize(), regionStartOrientationSet()
property size as %ZEN.Datatype.string;
size attribute on fo:simple-page-master
Property methods: sizeDisplayToLogical(), sizeGet(), sizeIsValid(), sizeLogicalToDisplay(), sizeLogicalToOdbc(), sizeNormalize(), sizeSet()
property startSidebarLength as %ZEN.Datatype.length [ InitialExpression = "0" ];
Specifies the amount of room available for the contents of the <pagestartsidebar> tag.
Property methods: startSidebarLengthDisplayToLogical(), startSidebarLengthGet(), startSidebarLengthIsValid(), startSidebarLengthLogicalToDisplay(), startSidebarLengthLogicalToOdbc(), startSidebarLengthNormalize(), startSidebarLengthSet()
property width as %ZEN.Datatype.length [ InitialExpression = "8.5in" ];
Specifies the width of the document.
Property methods: widthDisplayToLogical(), widthGet(), widthIsValid(), widthLogicalToDisplay(), widthLogicalToOdbc(), widthNormalize(), widthSet()
property writingMode as %ZEN.Datatype.string (VALUELIST = ",lr-tb,rl-tb,tb-rl,lr,rl,tb,inherit", XMLNAME = "writing-mode");
writing-mode XML attribute. It has the following possible values. Note that not all XSL-FO renderers will support all possible values.
lr-tb Text are written left-to-right and top-to-bottom (normal "alphabetic" text)
rl-tb Text are written right-to-left and top-to-bottom (Arabic and Hebrew text)
tb-rl Text are written top-to-bottom and right-to-left (Chinese and Japanese text)
lr Same as lr-tb
rl Same as rl-tb
tb Same as tb-rl
inherit
Note this places a writing-mode on fo:simple-page-master.
The semantics of writing-mode on simple-page-master differs from page-sequence. Specifically, on simple-page-master, it is used to interpret the meaning of before, after, start, end with respect to resolving the placement of page regions. However, it does not affect the writing-mode trait of reference areas generated by page-sequence. In the latter case, it is the writing-mode on page-sequence that counts.
To place a writing-mode on page-sequence use the writing-mode in the report or section element
lr-tb Text are written left-to-right and top-to-bottom (normal "alphabetic" text)
rl-tb Text are written right-to-left and top-to-bottom (Arabic and Hebrew text)
tb-rl Text are written top-to-bottom and right-to-left (Chinese and Japanese text)
lr Same as lr-tb
rl Same as rl-tb
tb Same as tb-rl
inherit
Note this places a writing-mode on fo:simple-page-master.
The semantics of writing-mode on simple-page-master differs from page-sequence. Specifically, on simple-page-master, it is used to interpret the meaning of before, after, start, end with respect to resolving the placement of page regions. However, it does not affect the writing-mode trait of reference areas generated by page-sequence. In the latter case, it is the writing-mode on page-sequence that counts.
To place a writing-mode on page-sequence use the writing-mode in the report or section element
Property methods: writingModeDisplayToLogical(), writingModeGet(), writingModeIsValid(), writingModeLogicalToDisplay(), writingModeLogicalToOdbc(), writingModeNormalize(), writingModeSet()
property writingModeRegionAfter as %ZEN.Datatype.string (VALUELIST = ",lr-tb,rl-tb,tb-rl,lr,rl,tb,inherit", XMLNAME = "writing-mode-region-after");
writing-mode XML attribute on the region-after. It has the following possible values. Note that not all XSL-FO renderers will support all possible values.
lr-tb Text are written left-to-right and top-to-bottom (normal "alphabetic" text)
rl-tb Text are written right-to-left and top-to-bottom (Arabic and Hebrew text)
tb-rl Text are written top-to-bottom and right-to-left (Chinese and Japanese text)
lr Same as lr-tb
rl Same as rl-tb
tb Same as tb-rl
inherit
lr-tb Text are written left-to-right and top-to-bottom (normal "alphabetic" text)
rl-tb Text are written right-to-left and top-to-bottom (Arabic and Hebrew text)
tb-rl Text are written top-to-bottom and right-to-left (Chinese and Japanese text)
lr Same as lr-tb
rl Same as rl-tb
tb Same as tb-rl
inherit
Property methods: writingModeRegionAfterDisplayToLogical(), writingModeRegionAfterGet(), writingModeRegionAfterIsValid(), writingModeRegionAfterLogicalToDisplay(), writingModeRegionAfterLogicalToOdbc(), writingModeRegionAfterNormalize(), writingModeRegionAfterSet()
property writingModeRegionBefore as %ZEN.Datatype.string (VALUELIST = ",lr-tb,rl-tb,tb-rl,lr,rl,tb,inherit", XMLNAME = "writing-mode-region-before");
writing-mode XML attribute on the region-before. It has the following possible values. Note that not all XSL-FO renderers will support all possible values.
lr-tb Text are written left-to-right and top-to-bottom (normal "alphabetic" text)
rl-tb Text are written right-to-left and top-to-bottom (Arabic and Hebrew text)
tb-rl Text are written top-to-bottom and right-to-left (Chinese and Japanese text)
lr Same as lr-tb
rl Same as rl-tb
tb Same as tb-rl
inherit
lr-tb Text are written left-to-right and top-to-bottom (normal "alphabetic" text)
rl-tb Text are written right-to-left and top-to-bottom (Arabic and Hebrew text)
tb-rl Text are written top-to-bottom and right-to-left (Chinese and Japanese text)
lr Same as lr-tb
rl Same as rl-tb
tb Same as tb-rl
inherit
Property methods: writingModeRegionBeforeDisplayToLogical(), writingModeRegionBeforeGet(), writingModeRegionBeforeIsValid(), writingModeRegionBeforeLogicalToDisplay(), writingModeRegionBeforeLogicalToOdbc(), writingModeRegionBeforeNormalize(), writingModeRegionBeforeSet()
property writingModeRegionBody as %ZEN.Datatype.string (VALUELIST = ",lr-tb,rl-tb,tb-rl,lr,rl,tb,inherit", XMLNAME = "writing-mode-region-body");
writing-mode XML attribute on the region-body. It has the following possible values. Note that not all XSL-FO renderers will support all possible values.
lr-tb Text are written left-to-right and top-to-bottom (normal "alphabetic" text)
rl-tb Text are written right-to-left and top-to-bottom (Arabic and Hebrew text)
tb-rl Text are written top-to-bottom and right-to-left (Chinese and Japanese text)
lr Same as lr-tb
rl Same as rl-tb
tb Same as tb-rl
inherit
lr-tb Text are written left-to-right and top-to-bottom (normal "alphabetic" text)
rl-tb Text are written right-to-left and top-to-bottom (Arabic and Hebrew text)
tb-rl Text are written top-to-bottom and right-to-left (Chinese and Japanese text)
lr Same as lr-tb
rl Same as rl-tb
tb Same as tb-rl
inherit
Property methods: writingModeRegionBodyDisplayToLogical(), writingModeRegionBodyGet(), writingModeRegionBodyIsValid(), writingModeRegionBodyLogicalToDisplay(), writingModeRegionBodyLogicalToOdbc(), writingModeRegionBodyNormalize(), writingModeRegionBodySet()
property writingModeRegionEnd as %ZEN.Datatype.string (VALUELIST = ",lr-tb,rl-tb,tb-rl,lr,rl,tb,inherit", XMLNAME = "writing-mode-region-end");
writing-mode XML attribute on the region-end. It has the following possible values. Note that not all XSL-FO renderers will support all possible values.
lr-tb Text are written left-to-right and top-to-bottom (normal "alphabetic" text)
rl-tb Text are written right-to-left and top-to-bottom (Arabic and Hebrew text)
tb-rl Text are written top-to-bottom and right-to-left (Chinese and Japanese text)
lr Same as lr-tb
rl Same as rl-tb
tb Same as tb-rl
inherit
lr-tb Text are written left-to-right and top-to-bottom (normal "alphabetic" text)
rl-tb Text are written right-to-left and top-to-bottom (Arabic and Hebrew text)
tb-rl Text are written top-to-bottom and right-to-left (Chinese and Japanese text)
lr Same as lr-tb
rl Same as rl-tb
tb Same as tb-rl
inherit
Property methods: writingModeRegionEndDisplayToLogical(), writingModeRegionEndGet(), writingModeRegionEndIsValid(), writingModeRegionEndLogicalToDisplay(), writingModeRegionEndLogicalToOdbc(), writingModeRegionEndNormalize(), writingModeRegionEndSet()
property writingModeRegionStart as %ZEN.Datatype.string (VALUELIST = ",lr-tb,rl-tb,tb-rl,lr,rl,tb,inherit", XMLNAME = "writing-mode-region-start");
writing-mode XML attribute on the region-start. It has the following possible values. Note that not all XSL-FO renderers will support all possible values.
lr-tb Text are written left-to-right and top-to-bottom (normal "alphabetic" text)
rl-tb Text are written right-to-left and top-to-bottom (Arabic and Hebrew text)
tb-rl Text are written top-to-bottom and right-to-left (Chinese and Japanese text)
lr Same as lr-tb
rl Same as rl-tb
tb Same as tb-rl
inherit
lr-tb Text are written left-to-right and top-to-bottom (normal "alphabetic" text)
rl-tb Text are written right-to-left and top-to-bottom (Arabic and Hebrew text)
tb-rl Text are written top-to-bottom and right-to-left (Chinese and Japanese text)
lr Same as lr-tb
rl Same as rl-tb
tb Same as tb-rl
inherit
Property methods: writingModeRegionStartDisplayToLogical(), writingModeRegionStartGet(), writingModeRegionStartIsValid(), writingModeRegionStartLogicalToDisplay(), writingModeRegionStartLogicalToOdbc(), writingModeRegionStartNormalize(), writingModeRegionStartSet()
Methods
method %DrawPageToXSLFO(ByRef context As %String, ByRef XSL As %GlobalCharacterStream, delay As %GlobalCharacterStream, masterName As %String = "main") as %Status
Renders the dimensinos of the page for a PDF report.Proposed change - add "masterName" parameter with default value "main"
method %DrawStyleToHTML(ByRef context As %Library.String, ByRef XSL As %Library.GlobalCharacterStream, delay As %Library.GlobalCharacterStream, SectionName As %Library.String = "") as %Status
Outputs the style information contained in its <class> children
for an HTML report.
method %DrawStyleToXSLFO(ByRef context As %String, ByRef XSL As %GlobalCharacterStream, delay As %GlobalCharacterStream, SectionName As %String = "") as %Status
Outputs the style information contained in its <class> children
for a PDF report.
Inherited Members
Inherited Properties
- applyLevel
- children
- class
- composite
- htmlstyle
- id
- includeColIfExpression
- includeColIfXPath
- includeColUnlessExpression
- includeColUnlessXPath
- level
- parent
- selectstylecond
- selectstylelist
- style
- stylecall
- styleparamNames
- styleparams
- tag
- template
- unlessexpression
- withinSmallmultiple
- xmlnamespace
- xmlnamespaceprefix
- xpath
- xslfostyle
Inherited Methods
- %AddToSaveSet()
- %ApplyClass()
- %ApplyLevelParameters()
- %ClassIsLatestVersion()
- %ClassName()
- %ConstructClone()
- %DeclareLevelParameters()
- %DispatchClassMethod()
- %DispatchGetModified()
- %DispatchGetProperty()
- %DispatchMethod()
- %DispatchSetModified()
- %DispatchSetMultidimProperty()
- %DispatchSetProperty()
- %DrawToAnnotatedXML()
- %DrawToHTML()
- %DrawToXSLFO()
- %EndLevel()
- %Extends()
- %GetAbsoluteURL()
- %GetParameter()
- %IncLevel()
- %IsA()
- %IsModified()
- %New()
- %NormalizeObject()
- %ObjectModified()
- %OriginalNamespace()
- %PackageName()
- %QuoteValue()
- %QuoteValueEmbedded()
- %QuoteValueL10N()
- %RemoveFromSaveSet()
- %SerializeObject()
- %SetModified()
- %StyleHTML()
- %StyleXSLFO()
- %ValidateObject()
- ApplyClass()
- CSPLinkToFileLink()
- CountSpaces()
- DoDocForHTML()
- GetDocForXSLFO()
- HTMLStyle()
- OutputId()
- XMLDTD()
- XMLExport()
- XMLExportToStream()
- XMLExportToString()
- XMLNew()
- XMLSchema()
- XMLSchemaNamespace()
- XMLSchemaType()
- XSLFOStyle()
- insertAxis()
- isCSPLink()
- needsURL()
- parent()
- processExclamationPoint()
- qualify()
- tagGet()