Skip to main content

General Error Messages

This document contains tables of numeric error codes and their corresponding error messages for InterSystems IRIS® data platform. Commonly, these error codes are reported as ERROR #nnn. These error codes are sometimes referred to as %Status error codes.

The $SYSTEM.Status class methods used for handling these error codes are documented in the InterSystems Class Reference.

You can determine the error message for a specified error code using the DisplayError()Opens in a new tab and Error()Opens in a new tab methods, as shown in the following example displaying error code #101, where the embedded message variables are %1="5", %2="10", and %3="2.7":

  DO $SYSTEM.Status.DisplayError($SYSTEM.Status.Error(101,"5","10","2.7"))

For more information on using these error codes, refer to %Status Error Processing in the “Error Processing” chapter of Using ObjectScript.

Error Codes 0 to 999

General Error Codes - 0 to 199
Error Code Description
1 the volume already exists
2 the read of the map block failed
3 error writing map blk of primary volume
4 unable to read the global directory map block
5 unable to write the global directory map block
6 unable to write the global directory block
13 failed opening the next volume
14 failed reading the next volume's map block
15 the directory name is too long
16 the number of maps is invalid
17 the size is out of range
18 failed creating a new volume
19 the file was already mounted
20 the file already exists
21 a file create is in progress
22 the current # of maps is too small
23 unable to expand the file
24 the file is cluster mounted
25 unable to allocate CFN
26 incompatible mount state or db does not exist
27 the system mgr's database cannot be cluster mounted
28 the database is in transition
30 the system is not part of the cluster
31 can't change the mode of a mounted database
32 there is not enough space on device for new vol
33 the new volume exceeds the system file size limit
34 unknown error writing to new volume
35 the database is being expanded
36 the database is not mountable
37 the database is mounted elsewhere
38 there is no room in GVXTAB for secondary volumes
39 the volume is readonly
40 databases cannot be deleted while they are cluster mounted
41 the directory was not found
42 The database name is invalid
43 the write daemon failed to set the READ/WRITE flag in label
44 the expansion failed to start
45 some or all database files were not deleted
51 unknown and unexpected error
52 invalid argument
53 target could not be opened
54 target could not be read
55 target could not be written to
56 the database is being restored
57 the database does not exist
58 the operation requires too many bitmap blocks
59 the allocation new bitmap blks failed
60 the database must be dismounted to do this
61 the database must be privately mounted for this
62 global directory must be empty
63 cannot cluster mount temp database
64 cannot dismount temp database
65 cannot reinitialize mounted database
66 the resource name in the database is not known to the system
67 the encryption key for this database is not activated
68 the mounted database count exceeds license limit
69 read/write state of mirrored databases can only be changed on the primary
70 *** Error while formatting volume because
71 Not owner
72 No such raw disk device
73 No such directory
74 I/O error
75 No such device or address
76 Permission to access file denied
77 Device or resource busy
78 File already exists
79 No such device or inappropriate use
80 File table overflow
81 Too many open files
82 Read-only file system
83 Error code = %1
84 Audit Database Max size must be set to 0
85 Operation is not permitted when running in single user mode
86 the database default collation is not available
87 the database block size is too small to support direct I/O
88 direct I/O is not supported on NFS filesystems
89 database must be opened for direct I/O because async I/O is enabled
90 2K database block size no longer supported
91 Creation of Database Extent is not allowed
92 Database was created in system with different endian
93 Journaling is required for Audit database
101 Top Pointer Level: # of blocks=%1 %2kb (%3% full)
102 Bottom Pointer Level: # of blocks=%1 %2kb (%3% full)
103 Pointer Level: # of blocks=%1 %2kb (%3% full)
104 Top/Bottom Pnt Level: # of blocks=%1 %2kb (%3% full)
105 Data Level: # of blocks=%1 %2kb (%3% full)
106 Total: # of blocks=%1 %2kb (%3% full)
107 Elapsed Time = %1 seconds, Completed %2
108 Error of type %1 while processing pointer block %2
109 The error occurred while processing node %1
110 The lower level block specifies a right link block of %1.
111 Error of type 1. View buffer not open or this dataset can't be mounted.
112 which is the first block on this level.
113 which has a left neighbor pointer block of %1
114 The pointer block is degraded and can't be parsed.
115 The lower level block is degraded and can't be parsed.
116 The global reference input as the expected first node is too long.
117 The pointer block's 1st node - %1 points to block %2. We were expecting it to point to %3, which is the right link of the last lower block of the previous pointer block.
118 The pointer block's 1st node is: %1. It does not
119 follow the last global reference.
120 equal the expected global reference based upon the right link data.
121 of the last lower block of the previous pointer block, which is: %1.
122 which is %1 pointing to the lower level block %2
123 **********Global %1 is Not OK**********
124 Global ^%1 is OK
125 The lower level block has a block type of %1
126 whereas we were expecting %1
127 The pointer block expected the data block to have
128 The pointer block did not expect the data block to have any
129 big strings but the data block's type information
130 big strings but the data block's big string count
131 says it does not.
132 says it does.
133 The lower level block's info about the first node in the next block is wrong.
134 The length in blnextpntlen4 is 0 but there is a right link
135 The length in blnextpntlen4 is nonzero but there is no right link
136 The length in blnextpntlen4 is too long for a global reference.
137 The reference described by blnextpntlen4/blnextpntvalue4
138 doesn't follow the last node in the block.
139 The length in blnextpntlen4 does not match the length of the first node in the next block
140 The lower level block has a value in blnextpntlen4
141 The lower level block has a value in blnextpntoff44
142 but this isn't a data block
143 blnextpntoff4 but this isn't a big database data block
144 (discovered while looking for big strings in the block)
145 The data block's count of big strings is %1.
146 whereas its block type specifies
147 there should be big strings.
148 there should not be big strings.
150 The data block has a syntax error
151 in its big string info
152 Map block %1 has a label error
153 The lower block %1 isn't allocated in map block %2
154 The data block points to a big string stored in block %1
155 that isn't allocated from its map block %1.
156 The pointer block is empty.
157 The lower block has a right link global reference that doesn't
158 Match what was expected in the next pointer node's global reference.
159 We would expect the lower block's last node to collate earlier.
160 We would expect them to be equal.
161 The lower block's right link reference is %1
162 The pointer block's next reference is %1.
163 The pointer node's global reference doesn't match
164 the 1st node of the lower block.
165 The lower block's 1st node is %1.
166 Since it is a big database data block it should match
167 the first blpntlen4 bytes of the first node, which is %1.
168 That doesn't match the next pointer node in the pointer block, which is %1.
169 The pointer node specifies a block # %1
170 That is out of the range of this database.
171 The pointer block has a right link of %1.
172 No longer present on disk.
173 Block %1 is not a pointer block type: %2
174 Top block %1 does not have a top pointer block type: %2
175 Lower level pointer block %1 has a top pointer block type: %2
176 Big Strings: # of blocks=%2 %3MB (%4% full) # = %1
177 Big Strings: # of blocks=%2 %3kb (%4% full) # = %1
178 The database cannot be mounted because
179 An unexpected error occurred: %1
180 Value (report to InterSystems) = %1
181 ***Further checking of this directory is aborted.
182 ***Further checking of this global is aborted.
183 ***We will continue checking with the next pointer block at this level.
184 The database is not mounted.
185 Inserted new node %1 at end of block.
186 Consider if this node should be in this block.
187 Inserted new node 1 at beginning of block.
188 Changes are needed in other blocks.
189 Inserted as new node %1.
190 Old node %1 and subsequent nodes have been shuffled up.
191 Node already exists (Node %1).
192 *** Not enough room in block. ***
193 ...Deleted. (Higher numbered nodes have been shuffled down.)
194 Deleted 1st node in block.
195 ***Type is %1 - Invalid Type.
196 ***Offset improper: %1 shouldn't be > %2
197 Top Pointer Level: # of blocks=%1 %2MB (%3% full)
198 Bottom Pointer Level: # of blocks=%1 %2MB (%3% full)
199 Pointer Level: # of blocks=%1 %2MB (%3% full)
General Error Codes - 200 to 399
Error Code Description
200 Top/Bottom Pnt Level: # of blocks=%1 %2MB (%3% full)
201 Data Level: # of blocks=%1 %2MB (%3% full)
202 Total: # of blocks=%1 %2MB (%3% full)
203 but the lower block has a right link of %1.
204 ***Map Error: The count field in map block %1 says %2 but the counted total is %3.
205 Integrity Job failed to start.
206 Stop integrity check?
207 Stop checking directory?
208 Stop checking global?
209 This points to big string block %1 but that has type %2
211 The pointer block contains the wrong global
212 Cannot insert long strings.
213 Creating 2k databases not allowed.
214 There are %1 duplicate pointers, the first is global %2 pointing to %3.
215 There is a duplicate pointer, global %1 pointing to %2.
216 '^%1' is not a valid global name.
217 Global name '^%1' is too long (over %2).
250 The stored value of the next pointer in this data block does not match the actual next pointer or blnextpntlen4 is incorrect.
251 Node #%1 in block #%2 contains an invalid subscript length
252 Collate #%1 in the block does not match with the collate #%2 in global directory
253 Block offset in bigstring block #%1 has bad value #%2.
254 The bigstring block #%1 is pointed with a bad block value #%2.
255 Block #%1 changed during integrity check, counts may be incorrect
256 Block #%1 changed during integrity check, might be OK, check should be rerun for this global
257 Unable to read global directory block #%1
258 Invalid name %1 in global directory block #%3, entry %2
259 %1 block %2 is corrupt
260 %1 block %2 has incorrect type
261 %1 block %2 has incorrect label
262 %1 block %2 has incorrect map number
263 %1 block %2 has incorrect incremental file number
264 %1 block %2 has incorrect database creation time
265 %1 block %2 is marked as bad
266 The top pointer block %1 is not marked as allocated
267 %1 errors found during integrity check
268 whereas we were expecting a pointer block type (2 or 6)
269 Global directory block %1 points back to previous block %2 in chain
270 Global directory block %1 has invalid type %2
271 *** Warning: Counts for global %1 may not be correct, one or more blocks changed during check ***
272 *** Warning: Global %1 might be corrupt, should be rechecked ***
273 *** Errors were detected, but only in blocks that changed during check ***
274 which is %1 in data block %2
275 which is %1 pointing to a lower level block, however, node may have been deleted. Re-run this check to be sure
276 The top pointer block %1 has a right link %2
277 Level %1 possibly has an infinite loop, should have %2 blocks, seen %3 already
278 Level %1 possibly has an infinite loop, pointer block %2's right link %3 seen already
279 That doesn't match the next pointer node in the pointer block, however, node may have been deleted. Re-run this check to be sure.
280 Error parsing global directory block %1. Some globals may be unavailable.
281 Block offset in the pointer block has a bad value.
282 Block offset in the lower level block has a bad value.
283 Error parsing pointer block %1.
284 %1 block %2 isn't allocated from its map block %3.
300 the database is not mounted.
301 the database has degradation.
302 the database is read-only.
303 A primary volume already exists in %1.
304 A secondary volume already exists in %1.
305 You must choose another location for this primary volume.
306 You must choose another location for this secondary volume.
307 Created %1 but failed to mount it. Mount error is %2.
308 Global %1 not found.
309 Global already defined.
310 Temp database cannot be the Manager's database
311 Failed to designate %1 as the Temp database
312 Failed to lookup sfn for the Temp database
313 Modify of %1 failed because
314 This is not a database file %1
315 The database was created but not formatted.
316 Cannot delete %1 because
317 Cannot delete database.
318 Deleting mirrored database %1 is not allowed.
319 Completed reclaiming routine blocks for %1.
320 Create failed because: %1
321 Could not set Keep Type for %1 because
322 %1 not mounted because %2 networking is not active.
323 Cluster mount failed for %1.
324 This global directory is corrupt.
325 Could not set journaling type for %1 because
326 Could not set protection for %1 because
327 There are no %1 KB buffers (or bigger) configured.
328 Could not set collation for %1 because
329 Database Error in ^%1, (report to InterSystems)
330 Block %1 is not used in any global
331 Block passed is wrong length: %1
332 Big string block, use Block Dump option
333 Global %1 already exists
334 Cannot create global %1
335 Global %1 would be remote, not allowed
336 %1 is not a legal name
337 Cannot write to file %1
338 Cannot read input file %1, error is %2
339 %1 is not a good configuration file
340 File %1 is not available
341 Block number %1 is too high for this database
342 Block %1 is not a map block
343 Block %1 is not the correct map block for %2
344 Function not supported for legacy databases
345 Cannot dismount manager's database
346 Cannot modify this parameter if database exists
347 Cannot set size less than current size of %1MB
348 Invalid Parameter for this Operation
349 Database must exist before adding volumes
350 Failed to mount %1, the reason is
351 Error reclaiming routine blocks for %1 :
352 Map block %1 is corrupt
353 Database in %1 created with %2 MB instead of requested %3 MB
354 Comm device(s) are currently in use
355 Database creation with block size %1 is not allowed
356 Database %1 cannot be mounted, resource %2 is unknown to the system
357 FileCompact failed: Insufficient global buffers
358 FileCompact failed: Compaction in progress
359 FileCompact: Freespace maximum reached
360 FileCompact failed: Freespace requested exceeds filesize
361 Defragmentation failed: Insufficient file space
362 Defragmentation failed: Insufficient space
363 Adding system database %1 to mirrored DB is not allowed
364 Cannot display contents of mirror information block
365 Namespace %1 is not available. Either the default database is not mounted, or you do not have permission to access it
366 Database must be larger than minimum allocated size
367 Import of global '%1' needs collation #%2, not available, skipping import of this item
368 Failed to return all cached free blocks in the Temp database
369 Failed, process id %1 has a truncation, compaction or defragmentation operation in progress in this database
370 The Expansion Size or Maximum Size must be an integer
371 Database %1 is dismounted
372 Database %1 is read only
373 Database %1 is cluster mounted
374 Database %1 is not journaled
375 Journaling is not enabled
376 The collation of some system globals is incorrect
377 Namespace %1 is not available via ECP. ECP Status returned: %2
378 Failed: Truncation in progress
379 Failed: Unexpected block type encountered
380 Completed but skipped some blocks, details recorded in the messages log.
381 Stopped at an unmoveable block, details recorded in the messages log.
382 Unable to get directory info for global %1, Error: %2
383 Global names for the start node %1 and end node %2 must be the same
384 Global range %1 must come after %2
385 Database ExpansionSize %1MB is less than %2MB which is the minimum value of %3KB block size database.
386 %1 is not a valid operation for the Temp database
388 Unknown error, code %1
389 Failed due to backup in progress
390 Failed due to expansion in progress
391 Mirrored database has %1 KB block size in primary and there are no buffers configured for it
392 Mirrored database has %1 KB block size in primary and it is not allowed in local system
393 Unknown system name %1
General Error Codes - 400 to 599
Error Code Description
400 , LINE:'%2=%3' at line %1
401 at line %1
402 Not enough fields
403 Invalid line, LINE:'%1'
404 No version information found in file '%1', file may be corrupt
405 Invalid version '%1'
406 Invalid parameter name '%1'
407 Invalid value for property '%1'
408 The following parameters are missing from section %1: '%2'
409 Cannot delete section %1
410 Too many fields
411 File %1 has been edited, cannot modify from the management portal
412 Invalid map keyword %1
415 Invalid or duplicate section name %1
416 Duplicate line detected
417 Duplicate entry %1 detected
418 Section '[%1]' already exists
419 %1 %2 already exists
420 %1 %2 does not exist
421 %1 map %2 in namespace %3 does not exist
422 %1 map %2 in namespace %3 already exists
423 Cannot delete server %1, in use by the following databases: %2
424 Device name cannot be the same as the Alias
425 Data server %1 not defined
426 Data server %1 not allowed for system databases
427 Cannot delete system database %1
428 Namespace %1 already exists
429 Cannot delete database %1, in use by the following namespaces: %2
430 MountAtStartup, ClusterMountMode, and MountRequired not allowed for a remote server
431 System database cannot be cluster mounted
432 Required database %1 is not defined
433 Namespace %1 does not exist
434 Cannot delete system namespace %1
435 Required namespace %1 is not defined
436 [%1] section must be defined before [Databases] section
437 [Databases] section must be defined before [Namespaces] section
438 [DeviceSubTypes] section must be defined before [Devices] section
439 [Namespaces] section must be defined before [%1] section
440 These sections are missing: %1
441 Further processing is aborted
442 System does not support clustered databases
444 Comment length must be less than %1 characters
445 Comment must start with one of the comment chars '%1'
446 Invalid nested comment, LINE:'%1'
447 No end comment '%1' found
448 Invalid routine type %1
449 Cannot map routine %1 when %2 already exists
450 %1 data server %1 already defined
451 You must delete mapping %1 before deleting mapping %2
452 Mapping %1 already exists
453 Cannot quiesce the system for namespace reactivation
454 Global mapping %1 must be defined before subscript mapping %2
455 Database %1 required, but could not be mounted
456 [config] MaxServers parameter must be increased to at least %1
457 Invalid namespace name
458 Invalid server name
459 Database %1 already exists
460 Invalid collation %1
461 System does not support IPv6
462 Invalid block size %1
463 Database %1 is not allowed for ECP Mirror Connection
464 ECP Server %1 does not exist
465 Remote Server %1 does not support Mirror
466 LongStrings cannot be enabled when 2KB or 4KB databases are mounted
467 Alias %1 is already in use by device %2
468 Invalid shadow name
469 [Shadows] section must be defined before [%1] section
470 Server name '%1' matched local system name
471 %1 section must be defined before [%2] section
472 New WIJ directory cannot contain an existing IRIS.WIJ file.
473 No entry found pointing at local directory %1 in the [Databases] section of the configuration
474 Unable to obtain lock on CPF file %1
475 Database %1 is required read-write, but was mounted read-only
476 Invalid MirrorConnection value %1
477 Database %1 is not allowed for ECP Non-Mirror Connection
570 Global %1 contains control characters. Restore of this global may fail. Use block format to save this data. See file %2 for details.
571 Database copy to %1 is already running
572 Cannot copy and replace the cluster mounted database %1
573 Cannot copy and replace a mirrored database %1
General Error Codes - 600 to 799
Error Code Description
601 CSP Application
602 Data Server
603 Database
604 Device
605 Global Mapping
606 Global Replication
607 License Server
608 Namespace
609 SQL Gateway
610 Routine Mapping
611 Mag Tape
612 Device Sub Type
613 Ethernet Connection
614 UDP Connection
615 Ethernet Device
616 Volume Set-UCI Mapping
617 Shadow Destination
618 Shadow Source
619 LAT Service
620 Com Port
621 SQL System Data Type
622 SQL User Data Type
623 SLM Replication
624 SLM
625 Journal History
626 Remote Volume Set
627 Namespaces
628 Databases
629 Devices
630 Configuration
631 Projection type
632 Java Application
633 EJB Application
634 C++ Application
635 Class Mapping
641 %1 '%2' is not defined in this Configuration.
642 %1 '%2' is referenced by the following %3.
643 %1 '%2' already exists.
644 Parameter '%1' invalid: '%2'.
645 %1 '%2' does not exist.
646 The configuration could not be reactivated because the changes made require a restart.
647 Error loading configuration %1: %2.
648 Configuration %1 needs to be %Saved() before calling the Activate() method.
649 Configuration %1 is in use by another process.
650 %1 already defined in Namespace '%2'.
651 Failed to set Startup configuration to '%1'.
652 A clustered configuration requires a non empty PIJDirectory.
653 Subscript reference may not contain the '~' character.
654 Subscript reference must begin with an open parenthesis.
655 Subscript reference must end with a close parenthesis.
656 Open parenthesis before a close parenthesis.
657 Invalid subscript in reference %1 subscript #1.
658 Invalid subscript in reference %1 subscript #%2.
659 Invalid range specification.
660 More that two references in range specification.
661 Name required for setting within Config API.
662 Key is required.
663 Unable to find information for config setting: %1
664 [Property does not exist]
665 Unable to open configuration object: %1
666 Remote system status change failed.
667 Error parsing config file: %1
668 Reactivation error: %1
669 Collate #%1 entered does not match with the collate #%2 of ^%3 in global directory
701 LDAP error(%1): %2
702 LDAP or passed argument is not initialized
703 Failed to load LDAP shared lib(%1)
704 Value reach 32K boundary
705 LDAP can't allocate enough from heap
706 Invalid parent
707 Unexpected object passed
708 LDAP unexpected library version - expecting - %1 loaded - %2
709 Server passed back another challenge, determine the response to that challenge and call the SASLConect again to send that response
710 Invalid parameter was passed
711 Request is not supported
712 specified SASL mechanism is not supported
725 Invalid peer certificate verification level for client type
726 Expanded CipherSuite list contains no values
727 SSL Communication Not Permitted With Current License
728 Certificate %1 has expired
729 Certificate %1 is not valid for TLS Web client authentication
730 Certificate %1 is not valid for TLS Web server authentication
731 Encryption with public key in certificate %1 failed
732 Decryption of private key file %1 failed (possible bad password)
733 The public key in certificate %1 and the private key in %2 do not match
734 Verification of certificate %1 with CA file %2 failed, error= %3
735 '%1' member missing mirror SSL configuration
736 '%1' is not a mirror member
737 '%1' is unreachable, error=%2
738 Can not disable all authentication mechanisms used by Terminal
739 Mirror SSL validation of '%1' failed with error: %2
740 Mirror SSL configuration missing certificate file name
741 Mirror SSL configuration missing CA file name
742 Certificate %1 is not valid
743 CA certificate file %1 is not valid
744 The X.509 certificate is missing
797 User account has expired
798 %1 authentication failed
799 Invalid Application name %1
General Error Codes - 800 to 999
Error Code Description
800 Logins for Service %1 are disabled
801 Logins are disabled
802 Logins are disabled for service %1, system startup in progress
803 Logins are disabled, system shutdown is in progress
804 Kerberos logins not allowed for service %1
805 Kerberos data integrity logins are not allowed for service %1
806 Kerberos data encryption logins not allowed for service %1
807 O/S logins are not allowed for service %1
808 Kerberos logins required for service %1
809 Service %1 does not exist
810 Invalid username or password
811 Kerberos K5CCache logins not allowed for service %1
812 Kerberos K5Prompt logins not allowed for service %1
813 Kerberos K5API logins not allowed for service %1
814 Kerberos K5KeyTab logins not allowed for service %1
815 User not authorized for service %1
816 Invalid authentication option %1
817 Client IP Address %1 not authorized for service %2
818 Cannot delete service %1
819 Service %1 already exists
820 Invalid authentication option %1 for service %2
821 Access Denied: Cannot access %1
822 Access Denied
824 Invalid Username or Password
825 Unable to initialize SQL, %1
826 Unable to run ZSTART, %1
827 User %1 is not authorized
828 User %1 account is disabled
829 User %1 unable to add role %2
830 User %1 unable to update last login
831 User %1 invalid name or password
832 User %1 error updating password
833 Login timeout
834 Login aborted
835 User %1 bypassing system security
836 Insufficient privilege for programmer access
837 User %1 already exists
838 User %1 does not exist
839 Cannot delete superuser %1.
840 Cannot delete %1, only user with %All role.
841 Cannot delete default user %1.
842 Username %1 is invalid.
843 Username %1 is in use by service %2.
844 Insufficient privilege for namespace %1, database %2, resource %3
845 Password does not match length or pattern requirements
846 Username cannot contain domain specification
848 System Security configuration %1 already exists.
849 System Security configuration %1 does not exist.
850 Audit database %1 not available
851 Invalid Audit Event name %1
852 Audit Event %1 already exists
853 Audit Event %1 does not exist
854 Cannot delete system Audit Event %1
855 Cannot modify system Audit Event %1
856 Error stopping auditing to %1
857 Unable to start auditing to %1
858 Unable to quiesce system to erase audit file
859 Audit record %1 does not exist
860 Unable to initialize security label for %1, resource is %2
861 Privileged application %1 is disabled.
862 User is restricted from running privileged application %2 -- cannot execute.
863 Privileged application %1 is locked.
864 An authenticated user name is required.
865 Routine %1, in database %2, is not authorized to add roles for application %3.
866 Client application %1 not authorized to add roles - Signature %2.
867 Cannot create privileged application %1 -- an application by that name already exists.
868 Privileged application %1 not found.
869 Application %1 does not exist
870 Cannot delete system application %1
874 Duplicate Match role %1.
875 Match role %1 does not exist.
878 Duplicate Target role %1.
879 Target role %1 does not exist.
880 Cannot delete role %1.
881 Cannot remove role %1.
883 Role %1 does not exist.
884 Role %1 already exists.
885 Maximum number of roles reached.
886 Cannot modify role %1.
887 Invalid role name %1.
890 Cannot delete system resource %1.
891 Resource %1 already exists.
892 Resource %1 does not exist.
893 Cannot modify system resource %1.
894 Maximum number of resources reached.
895 Duplicate resource %1.
896 Invalid resource name %1.
897 Invalid permission %1 for resource name %2.
898 SSL configuration %1 already exists
900 Cannot delete domain %1, domain is in use.
901 Domain %1 already exists.
902 Invalid Domain name %1
903 Domain %1 does not exist
904 User's must all be in domain %1, user %2 is not
913 PhoneProvider %1 does not exist
914 X509Credentials %1 does not exist
915 OpenAMIdentityServices %1 does not exist
920 Cannot modify field '%1'
921 Operation requires %1 privilege
922 Operation requires %1 privilege on resource %2
923 Operation requires %1 privilege on resource %2 or %3
924 Operation requires %1 privilege on resources %2 and %3
930 Cannot delete system security parameters
935 Password change required.
939 Insufficient privilege for object access '%1'
940 Insufficient privilege for operation
941 Audit header contains unwritten records
942 Username and Role cannot have the same name
943 User %1 has no role
944 Invalid expirationdate
945 Import of audit events to namespace '%1' is prohibited
946 User %1 has no accessible namespaces
947 Password logins not allowed for service %1
948 Unrecognized connection message
949 Unable to get full header of message within timeout
950 Invalid service name %1
951 Unauthenticated access for service %1 is disabled
952 Invalid password
953 Invalid Legacy password
954 Invalid password, cannot convert legacy password
955 Invalid Kerberos username or password for user %1
956 Kerberos error: %1
957 Password logins not allowed for application %1
958 Invalid password pattern '%1'
959 User %1 account has expired
960 User %1 account is inactive
961 Kerberos Authentication Not Permitted With Current License
962 Cache Direct Client must be upgraded
963 No authentication enabled for service
964 LDAP server unavailable - %1 %2 %3
965 LDAP search bind failed, error %1, %2
966 LDAP search failed, error %1, %2
967 LDAP count entries failed, error %1, %2
968 User %1 does not exist in the LDAP database
969 User %1 is not unique in the LDAP database
970 LDAP first entry failed, error %1, %2
971 Invalid LDAP password, error %1, %2
972 User %1 is not a LDAP user
973 User %1 is not a Delegated user
974 User %1 is not an IRIS user. They are either LDAP, Delegated, Kerberos, or O/S
975 LDAP Get DN failed, error %1, %2
976 LDAP Get Values Len failed, error %1, %2
977 Attribute value %1 must be in $list format
978 System requires that the user must own the %1 role to connect
979 SSL configuration %1 does not exist
980 Unable to activate SSL configuration %1
981 Invalid SSL configuration name %1
982 All specified CipherSuites require server authentication, Certificate File and Private Key File are required
983 Private Key File is required when Certificate File is specified
984 Certificate File is required when Private Key File is specified
985 Private Key File is required when Private Key Password is specified
986 CA File is required when Peer Verification or CRL File is specified
987 SSL configuration %1 is disabled
988 SSL handshake failed
989 SSL connection failed, make sure server address and port (not url) is specified
990 Can only test SSL Client
991 Host and Port must be specified
992 Password has expired
993 Cannot modify LDAP authentication user
994 Cannot modify Delegated authentication user
995 SSL/TLS is required for incoming connections
996 SSL/TLS is not configured for incoming connections
997 User %1 failed O/S delegated authentication
998 Login Token expired
999 User %1 Login Token expired

Error Codes 1000 to 1999

General Error Codes - 1000 to 1199
Error Code Description
1000 Shadow configuration '%1' incomplete: missing source IP address or DNS name
1001 Shadow configuration '%1' error: invalid source port number: %2
1002 Shadow configuration '%1' incomplete: directory for storing copied journal files not specified
1003 Shadow configuration '%1' incomplete: start point not specified
1004 Shadow configuration '%1' error: manager directory %2 is not allowed as a shadow database
1005 Shadow configuration '%1' incomplete: no database mappings exist
1006 Invalid shadow ID '%1': character '~' not allowed
1007 Shadow configuration '%1' error: cannot use %2, a primary or alternate journal directory, to store copied journal files
1008 Shadow configuration '%1': Source databases or journal belong to different mirrors ('%2' and '%3').
1010 Cannot resume a stopped shadow '%1'
1012 Unable to acquire exclusive access to properties of shadow configuration '%1'
1013 Must specify a shadow configuration ID
1014 Shadow configuration '%1' does not exist
1015 Shadow '%1' test failed: %2
1016 Shadow '%1' test timed out
1017 Shadow '%1' must NOT be running
1018 Shadow database '%1' is also its corresponding source database
1020 Database server and shadow server have incompatible shadow protocols: version '%1' on database server vs. version '%2' on shadow server
1021 Database server and shadow server have incompatible journal versions: version %1 on database server vs. version %2 on shadow server
1022 Connection denied by database server %1
1023 Received unrecognizable version '%1' from server
1024 Error allocating memory from Generic Memory Heap: %1
1025 Insufficient Generic Memory Heap available for shadowing
1026 Received unrecognizable message '%1' from server
1027 Cluster shadowing request denied: database server %1 is not part of a cluster
1028 Cluster shadowing request denied: database server %1 is not part of the source cluster of shadowing, identified by %2
1029 Shadowing aborted on error
1030 Unable to job off shadow server process
1031 Shadow '%1' is being stopped by another process
1032 Unable to suspend shadow '%1' within %2 seconds
1033 Requested journal file '%1' does not exist on the source
1034 Requested file '%1' is not a valid journal file on the source
1035 Journal file '%1' is corrupted
1036 Error opening file %1: %2
1037 Shadow copy %1 is ahead of source journal file %2
1038 Invalid address %1 in journal file %2
1039 Journal file to start or resume shadowing with is not specified - possibly as a result of the originally specified journal file name being invalid
1040 Failed to sync database updates as one updater has died
1041 Missing start point for cluster shadowing
1042 Incomplete start point for cluster shadowing: %1
1043 Shadowing is unavailable for current license
1044 Shadow is already running
1045 Bad checkpoint for cluster shadowing: %1
1046 Database updates are NOT currently journaled on the source of shadowing - shadow databases may be out of sync with the source
1047 Shadow is not suspended and therefore cannot be resumed
1048 Shadow is not stopped and therefore cannot be started or restarted
1070 Attempt to connect to %1 at port %2 timed out - database server is not running or network is down
1071 TCP read timed out - remote server is not responding
1072 Database server has disconnected - %1 to the server is aborted
1073 Shadow server (%2) has disconnected - %1 to the server is aborted
1074 Unable to job off routine %1
1075 Failed to start purging as another job (PID %1) appears to be in the middle of purging shadow journal files
1076 Purging not available to this shadow
1077 Error getting answer: %1
1078 Error killing job (PID %1): %2
1079 Purging aborted due to failure to sync journal
1080 Error mounting shadow database %1 when processing journal file %3 -- subsequent updates to the source database %2 will NOT be applied to the shadow database
1090 There is no database in %1 on the source or it is not readable
1091 Database in %1 on the source is not currently mounted
1092 Invalid source directory %1 - name too long or has invalid syntax
1093 Invalid journal EOF at offset %1 of file '%2' - must traverse forward to get end position
1094 Got fewer records than expected: last one at %1. Possible corruption in %2 or its source copy.
1100 Failed to open journal file '%1' for record reading
1101 File '%1' does not exist
1102 File '%1' is not a valid journal file
1103 Error getting previous file of '%1': %2
1104 Failed to create an instance of journal file '%1'
1105 The first record of journal file '%1' is invalid
1106 Error deleting journal file '%1': %2
1107 Search string not specified
1108 Journal file not specified
1109 Journal file '%1' is expected to be followed by another file, which does not exist
1110 No valid record in journal file '%1'
1111 Error getting the file following journal file '%1': %2
1112 Corruption between offsets %2 and %3 of journal file '%1'
1113 File '%1' does not exist in journal log '%2'
1120 Unknown column: %1
1121 Bad directory in journal record
1122 Bad global node in journal record
1140 Error starting journaling: %1
1141 Error stopping journaling: %1
1142 Error switching journal file: %1
1143 Directory '%1' does not exist
1144 Directory name '%1' is invalid
1145 Error creating directory '%1': %2
1146 Journal file prefix '%1' is invalid
1147 Directory name '%1' is too long for journal files with names in the form of '%2YYYYMMDD.nnn'
1148 Commas are NOT allowed in a journal file path ('%1%2YYYYMMDD.nnn')
1149 Unable to get directory attributes for directory %1
1150 Journal directory %1 cannot be readonly
1160 Invalid transaction ID: %1
1161 Transaction start at offset %1 of file %2 is not a TSTART record
1180 Cluster journal marker file missing
1181 Failed to open cluster journal marker file: %1
1197 Database encryption key activation at startup must be enabled before journal encryption can be enabled
1198 Failed to switch journal file to activate journal encryption immediately -- journal files will be encrypted following current file
1199 Failed to switch journal file to deactivate journal encryption immediately -- journal files will stop being encrypted following current file
General Error Codes - 1200 to 1399
Error Code Description
1200 Encryption key '%1' is already activated
1201 Encryption key is not activated
1202 '%1' is not a valid encryption key file
1203 Encryption key in file '%1' does not match activated key
1204 User '%1' not found in encryption key file '%2'
1205 User '%1' already exists in encryption key file '%2'
1206 Encryption key creation failed
1207 Encryption key activation failed
1208 Can not deactivate encryption key. Encrypted databases are mounted: %1
1209 Invalid password. Must contain at least %1 characters
1210 Can not remove last administrator from key file
1211 Wide Unicode characters are not supported in administrator usernames or passwords
1212 Disabling encryption key activation at startup is NOT allowed when %1
1213 Disabling encryption key activation at startup is NOT allowed when the encrypted journal file '%1' is required for crash recovery
1214 Deactivating encryption key is NOT allowed when %1
1215 Deactivating encryption key is NOT allowed when the encrypted journal file '%1' contains open transactions
1216 Encryption key activation at startup is still enabled
1217 Can not disable encryption key activation at startup. Encrypted databases are required at startup: %1
1218 Encryption key activation at startup must be enabled before audit encryption can be enabled
1219 Encryption key unwrap failed; possible incorrect password
1220 No space available for encryption key
1221 Key '%1' not found in encryption key file '%2'
1222 Cannot remove unattended activation administrator from key file
1300 Failed to lock DataCheck system
1301 Cannot be run from DataCheck daemon job
1302 DataCheck System already started
1303 Global reference %1 does not collate before %2 in collation %3
1304 DataCheck protocol error
1305 Failed to initialize DataCheck message queue
1306 Timed out starting DataCheck job
1307 Failure during DataCheck job initialization
1308 Access denied by peer with message: %1
1309 Timed out waiting for peer
1310 Duplicate database mapping for %1
1311 Timed out trying to establish a connection
1312 %1 is not supported by the peer system
1313 Unable to detect Mirror-based DataCheck configuration using Mirror name '%1'
1314 DataCheck source system found for destination GUID does not match the connecting destination system
1315 Related object '%1' has an incorrect DataCheck system name (%2)
1316 Database specification %1 is invalid
1317 Global selection mask is defined for duplicate database specifications %1 and %2
1360 RangeList state is invalid due to previous error and must be reloaded
1361 RangeList Collation is already set
1362 RangeList has newer version stored and must be reloaded
1370 Initial global reference is null
1371 Initial global reference and target global reference are identical
1372 Initial global reference and target global reference refer to different global names
1380 Workflow must have at least one phase
1381 Workflow NextPhase is out of range
1390 Global Reference is invalid
General Error Codes - 1400 to 1599
Error Code Description
1400 User %1 is not a Kerberos user
1401 Routine ZAUTHORIZE not found, see the ZAUTHORIZE routine in the SAMPLES namespace
1402 Routine ZAUTHENTICATE not found, see the ZAUTHENTICATE routine in the SAMPLES namespace
1403 Routine ZAUTHENTICATE requires the following parameters: (ServiceName,Namespace,Username,Password,.Properties), see the ZAUTHENTICATE routine in the SAMPLES namespace
1404 Cannot modify Kerberos authentication user
1405 User %1 is not a O/S user
1406 Routine ZAUTHORIZE requires the following parameters: (ServiceName,Namespace,Username,Password,.Credentials,.Properties), see the ZAUTHORIZE routine in the SAMPLES namespace
1407 Cannot modify O/S authentication user
1408 Invalid authentication option %1 for application %2
1409 User '%1' is not configured for two-factor authentication
1410 Incorrect function code '%1' for two-factor authentication
1411 Two-factor authentication timeout
1412 Incorrect token received for two-factor authentication
1413 Mobile phone service provider '%1' already exists
1414 Mobile phone service provider '%1' does not exist
1415 User '%1' has invalid mobile phone number '%2'
1416 User '%1' has invalid mobile phone service provider '%2'
1417 Invalid configuration for two-factor authentication
1418 User %1 account has reached the invalid login limit
1419 GetCredentials^ZAUTHENTICATE failed
1420 GetCredentials^ZAUTHENTICATE failed to return a username or password
1421 User '%1' has mobile phone number but no service provider
1422 Mirror and shadow service cannot both be enabled.
1423 LoginRules Security configuration %1 does not exist.
1424 Cannot add roles while ZINSERT active
1425 You must modify settings through the Security.System class
1426 Unauthenticated access for application %1 is disabled
1427 Unable to add or set Audit Event %1, event table may be full
1428 Studio does not support Two Factor Authentication
1429 Insufficient privilege for service %1
1430 Cannot use implied namespace %1 with -U switch
1431 The %Manager role requires the %1 resource with R/W access
1432 Domain name for user %1 is NULL, check network configuration or Kerberos settings
1433 Incorrect verification code received for one time password authentication
1434 Two-factor Authentication requires one of the following to be enabled: %1
1435 Two-factor SMS text authentication requires a phone number and service provider
1436 Only one type of Two-factor authentication can be enabled
1501 SSL configuration '%1' does not include valid SSL certificate
1504 Management Portal unavailable. You must modify settings through the System Management menu.
General Error Codes - 1600 to 1699
Error Code Description
1600 %1 already exists
1601 %1 does not exist
1602 %1 is still running, Pid: %1
1603 Cannot modify %1, operation is either running or has completed
1604 User terminated the operation
1605 Cannot open journal file %1
1606 Unable to find journal file after %1
1607 Source and destination database are the same - %1
1608 Cannot copy from an ECP database
1609 Cannot copy from system database %1
1610 Journaling must be enabled on your system
1611 Journaling is troubled - %1
1612 Database %1 - %2 must be configured for mirroring
1613 Unable to set mirror failover state, Status - %1
1614 Nodes from global %1 already exist in destination database %2
1615 Global %1 does not exist in source database %2
1616 %1 has already been run
1617 Cannot operate on namespace %1
1618 Routines are already split from namespace %1
1619 Unable to get directory info for global %1, Error: %2
1620 Collation for global %1 in directories %2 and %3 don't match
1621 Move globals job failed to start.
1622 Move globals %1 has already been run.
1623 Operation terminated by error
1624 Starting and ending global must be the same
1625 State is wrong for %1 call, State=%2
1626 Unable to obtain Data Move Namespace lock
1627 Unable to find SFN in journal %1 for source directory %2
1628 Collation of global %1 has changed, unrecoverable error at journal offset %2
1629 Did not handle Kill of node %1 - Range = %2
1630 UnHandled Journal record type %1 at journal offset %2
1631 Unable to start journal monitor
1632 Cannot calculate Freespace for %1, Database is dismounted
1633 Max size of database %1 must be increased by at least %2 MB
1634 Move of data into the following databases exceeds the space on the partition by %1 MB: %2
1635 New destination database directory for database %1 is not configured
1636 New destination database directory %1 for database %2 is already configured as database %3
1637 The following globals in range %1 already exist in destination database %2 : %3
1638 Data Move Operation %1 is running
1639 Unable to find and delete range %1
1640 Invalid method %1
1641 Invalid Job method %1
1642 Cannot Job method %1
1643 Move Data operation %1 %2 is already running
1644 Move operation %1 has already completed
1645 Move operation %1 has an unrecoverable error, you must roll it back
1646 Collation of global %1 has changed, unrecoverable error
1647 Unable to quiesce system within %1 seconds
1648 Unable to Suspend, operation already completed
1649 Unable to Suspend, operation not started
1650 Unable to Suspend, operation past journal phase
1651 Unable to suspend, operation already stopped
1652 Unable to Stop, operation already completed
1653 Unable to Stop, operation not started
1654 Unable to Stop, operation past journal phase
1655 Invalid Data Move name %1

Error Codes 2000 to 4999

General Error Codes - 2000 to 2299
Error Code Description
2000 Journal file #%1 for database '%2' not found in mirror journal log (%3)
2001 Failed to read header of journal file '%1'
2002 Mirror name not specified
2003 Mirror journal log file '%1' not found
2004 Failed to open journal log for mirror '%1'
2005 Failed to read journal log for mirror '%1'
2006 Cannot modify the name of the mirror set
2007 Cannot modify the GUID associated with the mirror set
2008 Failed to send updated recovery parameters to mirror members
2009 Mirror set GUID is not defined. %1 section failed to load
2010 Failed to load mirror configuration
2011 Mirror name cannot contain the ':' character
2012 Mirror name exceeds the maximum length of %1 characters
2013 Mirror parameters are already loaded - cannot be reloaded with MirrorMember.Load()
2014 JoinMirror and AsyncMemberGUID should not both be set - %1 aborting
2015 JoinMirror and AsyncMemberGUID should not both be set
2016 Missing system name in [MirrorMember] section, can't join mirror
2017 Missing mirror name in [MirrorMember] section, can't join mirror
2018 Missing mirror GUID in [MirrorMember] section, can't join mirror
2019 MirrorMember.CheckSecurity failed to open mirror service '%1'
2020 Mirror name not defined
2021 Bad mirror name '%1'
2022 Cannot shutdown mirroring on the primary mirror member
2023 System name cannot contain the ':' character
2024 System name exceeds the maximum length of %1 characters
2025 Mirror name not configured, AsyncMemberAuthorizedIDs cannot be loaded
2026 SSL DN (Distinguished Name) field already in use
2027 SSL DN (Distinguished Name) field cannot be null
2028 %1 missing required parameter(s) - aborting
2029 No Async member configuration is defined
2030 No mirror set name to update
2031 Could not find mirror set %1 in query list
2032 Mirror set name %1 does not exist
2033 Invalid mirror configuration for %1, system name '%2' is not unique
2034 Failed to allocate mirror set %1 structure
2035 Found duplicate mirror name or GUID with local in %1
2036 Failed to load mirror configuration of '%1'
2037 Failed to retrieve mirror configuration for %1 from %2 (%3)
2038 Mirror member name cannot contain the ':' character
2039 Mirror member name exceeds the maximum length of %1 characters
2040 Mirror set name is not defined
2041 Load All Mirror Set Members already run once, cannot be executed again
2042 Failed to find our mirror name (%1) in the mirror configuration for %2
2043 Could not add new member when the Async member connected
2044 Argument to %1 is not an object
2045 Failed to add Mirror Set Member %1
2046 Invalid mirror configuration for %1, guid (%2) for system %3 is not unique
2047 Incorrect base directory '%1' - Expected '%2'
2048 Failed to add Mirror Set Member %1 (#%2) to mirror %3
2049 Insufficient privilege to startup mirroring
2050 Mirror configuration not loaded
2051 Mirror set name '%1' is not configured
2052 Failed to start mirror manager daemon %1
2053 Failed to create mirror journal log file '%1'
2054 Failed to delete mirror journal log file '%1'
2055 Failed to open mirror journal file (%1) containing the start point of the journal file purge
2056 Virtual IP for mirror %1 is not a valid address '%2'
2057 Interface of Mirror Virtual IP does not exist '%1'
2058 Mirror Database Name is required but not provided
2059 Mirror Database Name exceeds the maximum length of %1 characters
2060 Mirror Database Name cannot contain the ':' character
2061 Mirror Database Name '%1' is not unique, found in mirror member %2
2062 Failed to check other systems for duplicate Mirror Database name
2063 Database '%1' is already being mirrored
2064 Cannot remove database '%1' as is not currently being mirrored
2065 Could not create new mirror: %1
2066 Mirroring Service is required but not enabled
2067 SSL Configuration %1 is required but missing
2068 SSL Configuration %1 is not enabled
2069 Names in SSL Server Configuration '%1' and Client Configuration '%2' are different
2070 Mirror Virtual IP '%1' is owned by another system
2071 Error retrieving Mirror Set information for '%1'. Error info: %2
2072 The character size of the other system is different from local system
2073 Mirrored Database '%1' is not found on this system
2074 This system has not been configured as a Mirror Member
2075 There is no other failover member defined on this system
2076 Error retrieving Mirror Member information for '%1'. Error info: %2
2077 Failed to force this member become primary, reason: %1
2078 Mirrored DB is already activated
2079 Failed to activate mirrored DB reason: %1
2080 Failed to remove mirrored DB reason: %1
2081 This is not a Failover mirror member
2082 Failed to connect to mirror primary node
2083 Failed to lookup instance name, reason: %1
2084 Could not join existing mirror: %1
2085 Virtual IP did not include or had bad CIDR subnet mask: %1
2086 Agent is unreachable with %1, reason: %2
2087 Mirror member %1 is unreachable with %2
2088 ECP connection to Mirror member %1 is unreachable with %2
2089 Network Interface %1 is not a virtual interface
2090 Network Interface is not specified for Virtual Address
2091 Failed to get SSL DN field on %1, reason: %2
2092 SSL required to mirror encrypted database
2093 Insufficient privilege to shutdown mirroring
2094 Mirror connections for %1 failed to disconnect cleanly
2095 Problem detected with mirror SSL/TLS configuration
2096 Mirror Virtual IP '%1' is not reachable
2097 Mirror Virtual IP '%1' could not find a matched subnet in Interface '%2'
2098 Cannot find starting location from filename '%1'
2099 Mirroring is unavailable for current license
2100 Failed to open MirrorSetMember entry for %1 (%2)
2101 Mirror name '%1' is already in use
2102 Mirrored DB %1 not found in failover member
2103 Mirrored DB %1 not found in primary member
2104 Failed to create new mirrored DB (%1)
2105 Matching mirrored DB %1 in member %2 was not created as mirrored DB
2106 Mirror Set %1 has already been started
2107 Mirror Set %1 has not been started
2108 Failed to open [Mirrors] entry for %1 (%2)
2109 Failover members can only be a member of a single mirror. [Mirrors] contains %1 mirror definitions
2110 Mirror name '%1' is not valid - must contain only alphanumeric characters
2111 Failed to read local mirror member information (%1)
2112 Delete operations on %1 are not permitted
2113 Operation can only be performed on the primary mirror member
2114 Failed to open [MapMirrors.%1] entry for %2
2115 Clear FailoverDB Flag is not allowed on this system
2116 Operation is not allowed on the primary mirror member
2117 Mirror promotion is not allowed for non DR member
2118 ISCAgent is not up on the local system
2119 Mirror promotion is only allowed when only one mirror set is configured
2120 Mirror promotion is only allowed when only one mirror set is configured
2121 One of the failover members is unreachable through the ISCAgent
2122 Failed to create Config.MapMirrors object
2123 GUID mismatch in journal files from mirror members (%1) vs (%2)
2124 Selected mirror partner %1 is not in the failover member list
2125 Selected mirror partner %1 is not a primary candidate
2126 Failed to clear ValidatedMember on %1. Error: %2
2127 Failed to tell primary %1 to promote %2. Error: %3
2128 ISCAgent is unreachable
2129 Journaling is required for mirrored databases
2130 Cannot remove database '%1' as it is not currently mounted
2131 Mirror promotion is not allowed for a relay server member
2132 VIP is configured but network interface is not configured
2133 Demotion is not allowed when this is the only failover member
2134 This member cannot belong to more than one mirror
2135 Failed to get ISCAgent version information
2136 Instance's version is later than ISCAgent's version
2137 There are already more than one failover member configured
2140 Remote member has different UNICODE property from local member
2141 Passed system name %1 is different from configured system name %2
2142 AsyncMemberType parameter is out of range or mismatch with the current setting
2146 Clear FailoverDB Flag is not allowed on non-activated mirrored DB
2147 Clear FailoverDB Flag failed due to: %1
2148 Default system name exceeds the maximum length of %1 characters, caller needs to provide a system name
2149 A DR async member cannot belong to more than one mirror
2150 DR async member is not allowed to connect to a non-failover member
2151 Journal encryption is not allowed when Mirror's UseSSL is not enabled
2152 Journal encryption is enabled but Mirror's UseSSL is not enabled
2153 This member is not a reporting member
2154 Dejournaling is already running (process id: %1)
2155 Demote without partner does not allow running primary member '%1'.
2156 Demote %1 failed during promotion. Error: %2.
2157 Primary (%1) is in trouble state (%2) mirror promotion is not allowed.
2158 This operation is only allowed on a reporting async member
2159 This instance is not tracking any mirrors
2160 This instance is not tracking mirror '%1'
2161 The mirror name must be specified because the async member is tracking multiple mirrors
2162 Failed to identify the ISCAgent application server port.
2163 Failed to identify the ISCAgent application server interface.
2164 The ISCAgent returned an invalid status response.
2165 This member is not an async member
2166 his operation is only allowed on an async member
2167 Invalid Mirror Database Name
2168 Backup daemon did not exit after mirror shutdown
2169 Mirror master daemon of mirror set %1 did not exit after 5 seconds timeout
2170 Mirror Dejournal Filter is enabled but the RunFilter method in SYS.MirrorDejournal.%1 class does not exist
2171 Mirror name '%1' contains an illegal character sequence '%2'
2172 Non-FailoverDB mirrored database is not allowed to be configured in DR member
2173 The mirror configuration change to %1 is blocked until the local validation trouble is resolved
2174 Failed to create or join mirror set 5 because a mirror journal file (10) exists with the same mirror name
2175 Mirror SSL DN is too long (over 1024 characters)
2176 Promotion is not allowed when the mirror is in 'No Partner In No Failover' state.
2177 Join as Failover is not allowed when the mirror is in 'No Partner In No Failover' state.
2178 Someone else is doing Promotion or Demotion on this member.
2179 Failed to shutdown mirror.
2200 There is no Certificate Authority server configured at instance %1 on node %2.
2201 Certificate Signing Request %1 not found.
2202 Certificate number %1 not found.
2203 Private key file %1 not found.
2204 Certificate Signing Request %1 creation failed. OpenSSL command output: %2
2205 Certificate %1 creation failed. OpenSSL command output: %2
2206 Subject Distinguished Name is required.
2207 Private Key file password is required.

Error Codes 5000 to 5999

General Error Codes - 5000 to 5199
Error Code Description
5001 %1
5002 ObjectScript error: %1
5003 Not implemented
5004 Cannot generate UUID
5005 Cannot open file '%1'
5006 File name '%1' is invalid
5007 Directory name '%1' is invalid
5008 File name is required
5009 Directory name is required
5010 File '%1' is already opened
5011 File '%1' is not opened
5012 File '%1' does not exist
5013 Cannot Generate Type Library
5014 %1 is not supported in this version
5015 Namespace '%1' does not exist
5017 Too many errors
5018 Routine '%1' does not exist
5019 Cannot delete file '%1'
5020 Cannot rename file '%1'
5021 Directory '%1' does not exist.
5022 Expected Data is missing
5023 Java Gateway Error: %1
5024 Unable to copy file '%1' to '%2'
5025 Invalid Connection Name: '%1'
5026 Invalid ECP client action type: %1
5027 File '%1' already exists
5028 Invalid routine name
5029 Unable to kill process %1
5030 An error occurred while compiling class %1
5031 Cannot JOB routine %1
5032 Cannot create directory '%1'
5033 Interrupt
5034 Invalid status code structure (%1)
5035 General exception Name '%1' Code '%2' Data '%3'
5036 Failed to acquire lock on SMP Query History metadata
5037 No permission to view files in directory '%1'.
5038 An error occurred while compiling the generator routine '%1'.
5039 An error occurred while calling function '%1'.
5040 Unable to copy file %1 to %2
5041 Unable to execute Java using '%1'. Java may not be installed correctly on your system.
5042 Unable to execute $zf(%1,%2).
5043 Jar file %1 does not exist.
5044 Java Exception: %1.
5045 Java unknown error: %1.
5046 Error executing java command '%1'. Java may not be installed correctly on your system.
5047 Parameter '%1' marked as base64 encoded but not valid base64 '%2'.
5050 Constraint name '%1' is invalid
5051 Class '%1' already exists
5052 Duplicated name: %1
5053 Class name '%1' is invalid
5054 Method name '%1' is invalid
5055 Parameter name '%1' is invalid
5056 Property name '%1' is invalid
5057 Storage name '%1' is invalid
5058 Trigger name '%1' is invalid
5059 Method name conflict: %1
5060 Parameter name conflict: %1
5061 Property name conflict: %1
5062 Storage name conflict: %1
5063 Trigger name conflict: %1
5064 Key name '%1' is invalid
5065 Key name conflict: %1
5066 Index name '%1' is invalid
5067 Index name conflict: %1
5068 Query name '%1' is invalid
5069 Query name conflict: %1
5070 Class name conflict: %1
5071 Constraint name conflict: '%1'
5072 Constraint SQL name conflict: '%1'
5073 XML Map name conflict: %1
5074 XML Map name '%1' is invalid
5075 Class dictionary out of date, please run upgrade utility $system.OBJ.Upgrade()
5076 Key name '%1' is longer than '%2' characters
5077 Index name '%1' is longer than '%2' characters
5078 Method name '%1' is longer than '%2' characters
5079 Property name '%1' is longer than '%2' characters
5080 Parameter name '%1' is longer than '%2' characters
5081 Query name '%1' is longer than '%2' characters
5082 Storage name '%1' is longer than '%2' characters
5083 Stored procedure name is not unique: %1, projected from %2
5084 Package name '%1' is invalid
5085 Package name '%1' is longer than '%2' characters
5086 Method implementation > 32k
5087 Projection class type is required for %1:%2.
5088 Projection class defined for %1:%2 does not exist.
5089 Projection class defined for %1:%2 is not a subclass of %Projection.AbstractProjection.
5090 An error has occurred while creating projection %1:%2.
5091 An error has occurred while removing projection %1:%2.
5092 Name conflict on class '%1' because class '%2' has the same name but differs in case.
5093 Name conflict on class '%1' because package '%2' has the same name but differs in case.
5094 Member name conflict in class '%1' between '%2' and '%3'.
5095 Name conflict on class '%1' because class '%2' could conflict in the class descriptor.
5096 Classname '%1' is longer than %2 characters.
5097 Collation for property '%1' is invalid: '%2'
5098 Constraint name '%1' is longer than '%2' characters
5099 Name conflict with project '%1' because you are trying to save project '%2' which has the same name but differs in case.
5100 In class '%1' sqlname name '%2' from query '%3' conflicts with query '%4' sqlname '%5'.
5101 Class name required
5102 Environment keyword required
5103 Method name required
5104 Parameter name required
5105 Property name required
5106 Storage keyword required
5107 Storage name required
5108 Trigger name required
5109 Library name required
5110 Query name required
5111 Key name required
5112 Index name required
5113 XML Map name required
5114 Package name required
5115 Class dictionary version number in database '%1' is too high.
5116 Class dictionary version for '%1' is out of date, please run upgrade utility $system.OBJ.Upgrade()
5117 In class '%1' element type '%2', element '%3' and '%4' have the same name but differ in case.
5118 Schema name conflict on class '%1' because package '%2' has the same schema but is a different name.
5119 The classname '%1' conflicts with the default resultset package name '%2'.
5120 The class descriptor is too large, instance methods %1, class methods %2, instance composite %3, class composite %4, properties %5, parameters %6.
5121 Parameter value for parameter '%1' is longer than '%2' characters
5122 Class '%1' index '%2': the SQLNAME '%3' is not unique
5123 Unable to find entry point for method '%1' in routine '%2'
5124 In class '%1' alias property '%2' from property '%3' conflicts with property '%4'.
5125 Invalid XML export version '%1', must be major minor version e.g. 2010.1.
5126 XML export version '%1' not supported, supports 2010.1 and onwards.
5127 In XML export keyword '%1' in class '%2' not available in target version '%3'. Will remove keyword in exported file.
5128 In XML export keyword SqlCategory value '%1' in class '%2' not supported in version '%3'. Will remove keyword in exported file.
5129 Invalid control character in class definition for XML export. Stripping value in XML export, value is '%1'.
5130 Member '%1' in class '%2' contains an invalid character, the following are not valid '%3'.
5131 Query class depends on '%1' which has been recompiled.
5132 Parameter '%1' in class '%2' is not a CONFIGVALUE type so can not be changed.
5133 Parameter '%1' in class '%2' is not defined in this subclass so can not be changed here, modify in superclass where it is defined.
5134 In XML export for index '%1' in class '%2' the index type=collatedkey is not supported in version '%3', will remove type keyword in exported file.
5135 An MVENABLED persistent class does not support polymorphic dispatch so you can not create a subclass '%1' to the extent root class '%2'.
5136 You can not have an MV enabled class with a property '%1' list/array collection of objects that includes classname.
5137 In class '%1' alias property '%2' from property '%3' conflicts with alias property '%4' from property '%5'.
5149 %1 keyword '%2' type in '%3' is invalid
5150 %1 keyword '%2' value in '%3' is invalid
5151 Class attribute keyword '%1' is invalid
5152 Environment keyword '%1' is invalid
5153 Method attribute keyword '%1' is invalid
5154 Parameter attribute keyword '%1' is invalid
5155 Property attribute keyword '%1' is invalid
5156 Trigger attribute keyword '%1' is invalid
5157 Class keyword type '%1' is invalid
5158 Method keyword type '%1' is invalid
5159 Parameter keyword type '%1' is invalid
5160 Property keyword type '%1' is invalid
5161 Trigger keyword type '%1' is invalid
5162 Method keyword value '%1' is invalid
5163 property keyword value '%1' is invalid
5164 Key attribute keyword '%1' is invalid
5165 Key keyword type '%1' is invalid
5166 Key keyword value '%1' is invalid
5167 Index attribute keyword '%1' is invalid
5168 Index keyword type '%1' is invalid
5169 Index keyword value '%1' is invalid
5170 Query attribute keyword '%1' is invalid
5171 Query keyword type '%1' is invalid
5172 Query keyword value '%1' is invalid
5173 Property '%1' SQL column must be greater than 1 and not greater than 4096
5174 XML Map attribute keyword '%1' is invalid
5175 XML Map keyword type '%1' is invalid
5176 Class keyword value '%1' is invalid
5177 Index property collation of '%2' is invalid: '%1'
5178 Index data property '%2' is invalid or transient: '%1'
5179 Property '%1' SQL column must be unique: '%2' is assigned to '%3'
5190 InitialExpression is not supported for streams, property '%1'
5191 Can not implement a system method in class '%1'
General Error Codes - 5200 to 5399
Error Code Description
5201 Invalid parse tree
5202 Nothing to compile
5203 CDL Parser error: %1
5250 Index '%1':'%2' type class, '%3' is not an INDEX class
5251 Cannot change final method '%1'
5252 Cannot change final parameter '%1'
5253 Cannot change final property '%1'
5254 Cannot inherit from final class '%1'
5255 Cannot override final property method '%1'
5256 Cannot replace final behavior '%1'
5257 Cannot override key definition '%1'
5258 Cannot override index definition '%1'
5259 Query type cannot be changed: '%1'
5260 Cannot change final query '%1'
5261 Cannot override final query method '%1'
5262 Cannot project query with parameters '%1' as view
5263 Cannot project non-SQL query '%1' as view
5264 Property %1: SQLComputeOnChange attribute %2 is not defined
5265 Final keyword '%1' can not be changed
5266 Multiple dependent relationships defined: '%1'
5267 Cannot change final XML Map '%1'
5268 Cannot override final XML method '%1'
5269 Cannot override final method '%1'
5270 There is a composite method name conflict between '%1' and '%2'
5271 Cannot override '%1' definition: '%2'
5272 Cannot change final '%1': '%2'
5273 Aliased method loop detected in %1:%2
5274 Aliased method '%3' not found in %1:%2 (%4)
5275 Aliased method '%3' signature mismatch to %1:%2
5276 Aliased method '%1:%2' refers to class %3 that is not a superclass
5277 Cannot introduce dependent (parent) relationship '%1' in subextent '%2' of '%3'
5278 VERSIONPROPERTY property '%2' is not defined in '%1'
5279 VERSIONPROPERTY cannot be changed in subextent '%1'
5280 Cannot support calculated collection property '%1' (it can be computed but not calculated).
5281 Class has multiple identity properties: '%1::%2'
5282 Identity property cannot be a collection: '%1::%2'
5283 Identity property type must be integer: '%1::%2'
5284 IDKEY index based on non-identity property: '%1::%2'
5285 Property '%1' is SQLComputed but no SQLComputeCode is defined
5286 Cannot override classtype '%1' from class '%2' with '%3' in class '%4'.
5287 Class contains too many properties and hence too many instance variables to compile.
5288 Compilation of queued classes skipped because queued classes can not queue more classes for compilation more than twice. Classes skipped: '%1'
5289 Unable to construct the compile tree because class '%1' which it depends on has not had inheritance resolved.
5290 Class contains too many '%1' members '%2' maximum supported is '%3'.
5291 Class inheritance depth is too large, maximum supported is '%1'.
5292 Class/es '%1' has already been compiled twice during this compile so they can not be queued to compile again.
5301 Method '%1' is missing call tag
5302 Method '%1' is missing code
5303 Method '%1' is missing expression
5304 Method '%1' is missing generator
5305 Method '%1' is missing name
5306 Parameter '%1' is missing name
5307 Property '%1' is missing name
5308 Query '%1' is missing name
5309 Query '%1' is missing type
5310 SQL Procedure Method '%1' must be a class method
5311 SQL Procedure Method '%1' context parameter is invalid
5312 Constraint '%1' is missing name
5313 Projection '%1' is missing type
5314 Method '%1' inherited from class '%2' and required to be regenerated in this subclass has no code as superclass is deployed.
5315 Member '%1' method '%2' inherited from class '%3' and required to be regenerated in this subclass has no code as superclass is deployed.
5316 Class dependency loop for classes '%1'
5317 Class dependency loop for class '%1', parent/child class '%2' has a different system level
5318 Class dependency loop in classes that must be fully compiled before others in classes '%1'
5319 The type of a property in a serial class cannot be recursive: %1
5320 Class '%1' has more than one property of type %Library.RowVersion. Only one is allowed. Properties: %2
5330 Relationship OnDelete value '%3' in '%1':'%2' is invalid
5331 OnDelete keyword value '%3' is only valid for a relationship: '%1':'%2'
5349 Collection of type='%3' is not supported: '%1':'%2'
5350 Class '%1' can not be locked for exclusive use as user '%2' in process '%3' has an escalated lock.
5351 Class '%1' does not exist
5352 Class '%1' is not up-to-date
5353 Class dependency for class '%1' is unresolved.
5354 Circular inheritance detected: %1
5355 Method generator dependency unresolved: %1
5356 Compiled storage class '%1' does not exist
5357 Class dependency for class '%1' is unresolved because its parent/child, class '%2', is unresolved.
5358 Method with language = '%1' cannot be projected as an SQL procedure: '%2'
5359 Language type = '%1' not supported for method generator = '%2'
5360 Class '%1' is a stub name and can not be opened
5361 Attempt to set method '%1' but member method '%2' is already defined
5362 Attempt to set member method %1:%2:%3 but this is not defined in this class
5363 Attempt to set member method %1:%2:%3 but this is overridden by method %4
5364 Class '%1', used by '%2', is not defined.
5365 Name for table projected from collection '%1::%2' is not unique: %3
5367 Routine placement dependency unresolved: %1
5368 System shutting down so unable to compile.
5369 Class '%1' is currently being compiled by process '%2'
5370 Method generator '%1' does not exist
5371 Class '%1' can not be locked for shared use
5372 Class '%1' can not be locked for exclusive use
5373 Class '%1', used by '%2', does not exist
5374 Internal error attempting to create class descriptor in method '%1'. Contact support
5375 You can not use an instance property '%1' in a class method
5376 Method or Property '%1' does not exist in this class.
5377 You are attempting to call instance method '%1' from a class method
5378 Class '%1' is in deployed mode.
5379 Can not compile class in deployed mode: '%1'.
5380 Class '%1', used by '%2', is in deployed mode.
5381 Can not export class in deployed mode: '%1'.
5382 Can not edit class in deployed mode: '%1'.
5383 Only SQL DATA Map can be overridden: '%1'.
5384 SQL Map keywords are final, only new DATA items are valid: '%1'.
5385 SQL Map DATA piece %3 in node %2 is already used: '%1'.
5386 Method '%1' does not exist in any superclass to class '%2'.
5387 Method '%1' is abstract in the superclass to class '%2' so you can not call it.
5388 You do not have write permission on the database class '%1' is in, so class lock can not be obtained.
5389 Method '%1' is an instance method that uses ##super to call class '%2', but this class is not a primary superclass of '%3' so can not be called.
5390 Class dependency for class '%1' is unresolved because its predecessor, class '%2', is unresolved.
5391 Class dependency for class '%1' is unresolved because of the following error: %2.
5392 No such method '%1' defined in this class.
5393 You can not reference a property '%1' in a class method.
5394 Class '%1' depends on class '%2' which has a different System level that prevents it being compiled first or together.
5395 Invalid routine to call from class '%1' to method '%2' via label '%3'.
5396 Class descriptor for class '%1' is too large to be supported by system code.
5397 You do not have write permission on the database item '%1' is in so unable to compile this item.
5398 Lock table full: Class '%1' can not be locked for exclusive use
5399 Can not compile class '%1' because class '%2' is not up-to-date
General Error Codes - 5400 to 5599
Error Code Description
5400 Property cannot be stored in multiple data locations: '%1.%2'
5401 Invalid action type: %1
5402 Invalid CacheDirect map
5403 Invalid CLIENTDATATYPE: %1
5404 Invalid code mode returned by generator: %1
5405 Invalid collection type: %1
5406 Invalid default storage environment
5407 Invalid ID Cardinality: %1
5408 Invalid ID Counter: %1
5409 Invalid ID Dependency: %1
5410 Invalid ID Key: %1
5411 Invalid ID Key column: %1
5412 Invalid ID Key property: %1
5413 Invalid identity type: %1
5414 Invalid index attribute: %1
5415 Invalid key
5416 Invalid key property: %1
5417 Invalid method code mode: %1
5418 Invalid property type: %1
5419 Invalid reference type: %1
5420 Invalid storage alias
5421 Invalid storage definition
5422 Invalid usage of no context: %1
5423 No data maps defined
5424 No storage name specified
5425 Property parameter not declared: %1
5426 Property type can not be changed: %1
5427 Error compiling routine: %1
5428 Storage class not specified
5429 Storage '%1' not defined
5430 Trigger '%1' not defined
5431 Query parameter not declared: %1
5432 Type specified in ROWSPEC is invalid: %1
5433 Invalid ODBCTYPE: %1
5434 Invalid SQLCATEGORY: %1
5435 Invalid storage structure
5436 Invalid storage dependency
5437 Invalid storage literal expression: %1
5438 Invalid storage symbol expression: %1
5439 Storage undefined symbol: %1
5440 Invalid serial dependency
5441 Undefined storage symbol: %1
5442 Data subscript already in use: %1
5443 Multiple Id Keys defined: %1
5444 Multiple Primary Keys defined: %1
5445 Multiple Extent indices defined: %1
5446 Id Key cannot be conditional: %1
5447 Primary Key cannot be conditional: %1
5448 Extent index cannot be conditional: %1
5449 Cannot cluster data with Id Key: %1
5450 Cannot cluster data with Extent index: %1
5451 Properties cannot be defined for Extent index: %1
5452 Extent index cannot also be a key: %1
5453 Datatype classes can not have properties: %1
5454 Attribute specified in EXTENTQUERYSPEC is invalid: %1
5455 Trigger '%1' event invalid
5456 Trigger '%1' event required
5457 Trigger '%1' time invalid
5458 Trigger '%1' time required
5459 Trigger '%1' order required
5460 Trigger '%1' code required
5461 Stream type for attribute '%1' is invalid
5462 Stream storage value for '%1' is invalid
5463 Invalid foreign key attribute: '%1'
5464 Foreign key '%1' target class '%2' is invalid
5465 Foreign key '%1' target key '%2' is invalid
5466 Error code '%1' is out of range
5467 Error name '%1' is invalid
5468 Index '%1' TYPE is invalid
5469 View classes can not have properties: %1
5470 Id, Primary Key and Unique indices cannot override collation: %1
5471 Bitmap index cannot be unique: %1
5472 Cannot cluster data with a bitmap index: %1
5473 Constraint parameter not declared: %1
5474 ID Counter is not valid for external table: %1
5475 Error compiling routine: %1. Errors: %2
5476 Compilation signature in routine '%1' is incorrect
5477 Keyword signature error in %1, keyword '%2' must be '%3'
5478 Keyword signature error in %1, keyword '%2' must be '%3' or its subclass
5479 An IDKEY Index is required for persistent classes: %1
5480 %1 parameter not declared: %2
5481 Class %1 storage definition is invalid
5482 Class %1 storage is invalid
5483 Invalid collection type for subnode: %1
5484 Bitmap indices not supported in dependent class
5485 Bitmap indices are only supported when the IDKEY is based on a single positive integer attribute
5486 Invalid method language: %1
5487 Invalid ROWSPEC format %2: %1
5488 Invalid %1 formalspec format %2, expected %3
5489 Error $ZE='%1' reported while running generator for property method '%2:%3'
5490 Error $ZE='%1' reported while running generator for method '%2'
5491 Cannot form a relationship with a serial or literal class, '%1'
5492 Relationship cardinality is invalid, '%1'
5493 Relationship cardinality is required, '%1'
5494 Inverse cardinality, '%2' is not valid, '%1'
5495 Relationship inverse is required, '%1'
5496 Inverse property, '%2', is not defined, '%1'
5497 Inverse of inverse property, '%2' does not reference relationship, '%1'
5498 Related class, '%2', has not been compiled, '%1'
5499 Internal relationship error
5500 %1 formal argument type in %2 is invalid: %3
5502 Error compiling SQL Table '%1'
5503 Field name is invalid: %1
5504 Parent column '%1' is invalid
5505 SQL Table, '%1', parent is invalid
5506 SQL Counter '%1' is invalid
5507 SQL Identity table '%1' is invalid
5508 SQL Map data field '%1' in Map '%2' is invalid
5509 SQL Map row IDField '%1' is invalid
5510 SQL Map Subscript '%1' in Map '%2' is invalid
5511 SQL Map type '%1' is invalid
5512 SQL Reference target '%1' is invalid
5513 Map Data Field '%1' is not a valid field
5514 Map expression - unknown or invalid field: %1
5515 Table '%1' already exists
5516 Table '%1' does not exist
5517 Table not found
5518 Table ID '%1' does not exist
5519 Invalid SQL Parent table
5520 Invalid table reference
5521 SQLError: SQLCODE=%1 %msg=%2
5522 Cannot export SQL Table '%1', parent not exported
5523 Table name is invalid: %1
5524 Invalid {Field} reference in %2: '%1'
5525 Class with View named '%1' not found
5526 Table '%1', specified as reference by '%2', does not exist
5527 SQL Privilege Violation
5528 Illegal Regular SQL identifier: '%1', SQL Delimited Identifier option is off
5529 Illegal Regular SQL identifier: '%1' is an SQL Reserved word please specify a different SQL name for this %2
5530 Invalid username/password
5531 SQLMGR Missing class name.
5532 Connection Error
5533 Allocation Error
5534 Columns error
5535 Tables error
5536 PrimaryKeys error
5537 Unable to move to offset %1 in stream
5538 Map Data Variable '%1' expression in Map '%2' is missing
5539 Map Data Variable name missing in Map '%1', subscript level '%2'
5540 SQLCODE: %1 Message: %2
5541 Map: %2 - Map Expression - unknown or invalid field: %1
5542 Map: %2 - Data Access Expression - invalid expression '%1'. Must be a {Li}, {Di}, or {iDj} reference from a previous subscript level.
5543 Map: %2 - Invalid Condition, NEXT Subroutine, Row Reference, or Subscript Stop Expression - invalid expression '%1'. Must be an {Li} or {Di} reference from this or a previous subscript level, or an {iDj} reference from a previous subscript level.
5544 Map: %2 - Data Access Variable Expression - invalid expression '%1'. Must be a {Li}, {Di}, or {iDj} reference from this or a previous subscript level.
5545 Map: %2 - Map Data Retrieval Code - invalid expression '%1'. Must be a {Li}, {Di}, {iDj}, {%row}, {%rowraw}, or {*} (This field) reference.
5546 Map: %2 - RowID Specifications - invalid expression '%1'. Must be a {Li} or any field from Map Data.
5547 Map: %2 - Subscript Expression - invalid expression '%1'. Must be a valid field reference. If this is the Master Map, it must be an IDKEY field.
5548 Map: %2 - Map Data Field Name - invalid expression '%1'. Must be a valid field reference.
5549 Map: %2 - Map Data Node - invalid expression '%1'. Must be a {Di} or {iDj} reference.
5550 SQL does not support data type methods in languages other than COS in class %1 method %2.
5551 DEFAULTDATA must be a listnode: %1
5552 PARENT token used in storage but there is no parent relationship: %1
5553 ID Property collation must be EXACT: %1
5554 %2 parameter value must be a positive integer: %1.%2=%3
5555 Incorrect numeric format in class %1 property %2 method %3
5556 Foreign key '%1' cardinality does not match referenced key
5557 BITSLICE index can only have one property: %1
5558 A SUBVALUE index is defined but BuildValueArray method is not implemented: %1
5559 Studio was not able to parse the class definition for class '%1' correctly, possibly due to non-matching {} or () characters, so we can not compile this class. Edit this in Studio and correct the problem.
5560 Can not save a read only method. This is because implementation is too large to put into property
5561 An index must have at least one property: %1
5562 A SUBVALUE index cannot be unique: %1
5563 %2 parameter value must be an integer between 0 and 15: %1.%2=%3
5564 Storage reference: '%1' used in '%2' is already registered for use by '%3'
5565 Error registering reference '%1' for use by '%2': %3
5566 Unable to recompile all classes in %SYS if system library database is read only
5567 Class '%1' is in a database you do not have write permissions on so it can not be compiled
5568 %Currency SCALE parameter value is final and cannot be overridden: %1.%2
5569 SCALE parameter value cannot be negative: %1.%2
5570 Class '%1' is in a database you do not have write permissions on so %2 cannot be defined as a subextent.
5571 Property '%1' in class '%2' is defined as 'not inheritable' but this is not supported.
5572 Can not inherit relationship property '%1' in class '%2' as a secondary superclass.
5573 Required constraint not supported on N-Cardinality relationship property '%1' in class '%2'.
5574 Error reported while running generator for parameter '%1'
5575 Index cannot reference a private property of a serial class: %1
5576 No metadata created by '%1'.
5577 Error calling metadata generator '%1'.
5578 No method found for metadata generator '%1'.
5579 Invalid codemode '%1' for metadata generator '%2'.
5580 SQL Privilege Violation: '%1'
5581 Error during Build or Purge Indices: $ZError = '%1'
5582 Unable to grant all privileges on tables, views, and procedures to _PUBLIC for SAMPLES namespace: $ZError = '%1'
5583 SQL Map '%1', Data Field '%2', Node Value '%3' is invalid. Node Value is not allowed for index maps, only data maps.
5584 Unable to grant SELECT privilege on tables Docbook.block to _PUBLIC for DOCBOOK namespace: $ZError = '%1'
5585 Unable to define default RowID Specifications for class %1, map %2, field %3. RowID Specifications must be defined manually for this map definition.
5586 Invalid argument passed to %1. %2 parameter must be one or more of: %3.
5587 Invalid argument passed to %1. %2 parameter must be begin with one of: %3.
5588 Invalid argument passed to %1. %2 parameter must be '%3'.
5589 Invalid argument passed to %1. %2 parameter must be '9,ProcedureName'.
5590 Failed to acquire lock on extent %1 in order to determine Map Block Counts for the extent
5591 Invalid argument passed to %1. %2 parameter must be %3.
5592 Unable to split global '%1' into segments for parallel work because '%2'.
5593 Unable to split global '%1' into segments for parallel work.
5594 Error during %SQLBuildPurgeIndexForRow: $ZError = '%1'
5595 Feature is not supported for a Sharded table: '%1'.
5596 Global name is missing for SQL map '%1' in table '%2'.
5597 Sharded table's shard key (%1) must be the same as the idkey (%2) when the idkey (or identity field) is defined.
5598 Sharded class '%1' must use storage type %Storage.Persistent, not storage type '%2'.
5599 Sharded class '%1' must be ClassType 'persistent', not ClassType '%2'.
5597 Sharded table's shard key (%1) must be the same as the idkey (%2) when the idkey is defined.
5598 Sharded class '%1' must use storage type %Storage.Persistent, not storage type '%2'.
5599 Sharded class '%1' must be ClassType 'persistent', not ClassType '%2'.
General Error Codes - 5600 to 5799 (Macro Compiler Errors)
Error Code Description
5600 Feature not supported for sharded class %1: %2 %3.
5601 No class context: %1
5602 Cannot resolve super class '%1'
5603 Instance variable '%1' does not exist
5604 Instance variable '%1' does not support array
5605 Invalid class context for instance variable '%1'
5606 Invalid usage of super - %1
5607 Reference variable '%1' does not exist
5608 Reference variable '%1' does not support array
5610 Referenced macro not defined: '%1'
5611 Function macro missing arguments: '%1'
5612 Referenced macro missing right paren: '%1'
5613 Too many arguments to macro: '%1'
5614 Not enough arguments to macro: '%1'
5615 No closing %1 character inside '%2'
5616 No open parenthesis after ##keyword
5617 Invalid preprocessor ##keyword: ##%1
5618 No closing parenthesis after ##%1
5619 Invalid ##%1 argument '%1'
5620 Need Table.Field for ##%1
5621 No table '%1' for ##%1
5622 No field '%1' in table '%1' for ##%1
5623 Invalid argument '%1' to ##%1
5624 No previous ##%1 (NEW%1) for ##%1(%1%1)
5625 No macro name for #define
5626 No closing paren for arglist
5627 More than one macro parameter with #def1arg
5628 Macro argument does not begin with %
5629 Bad character in argument
5630 ##continue on last line
5631 '%1' ignored; not preceded by #if or #ifdef
5632 Null argument to '%1'
5633 Error evaluating #if or #elseif argument (%1): %2
5634 No macro name for #%1
5635 No include file '%1'
5636 No library file '%1'
5637 No version #%1 for library file %1
5638 Incorrect mode for #sqlcompile
5639 ##function on '%1' failed with an error: %2
5640 #routine already specified for this macro source file
5641 #routine cannot be specified after an sql statement
5642 invalid routine name specified in #routine
5643 cannot nest ##rtnref calls
5644 invalid reference specified in ##rtnref
5645 another element of the same name already exist
5646 ##expression on '%1' failed with an error: %2
5647 Invalid macro name in #define or #def1arg: %1
5648 ##function use is restricted to embedded SQL
5649 Too many (%1) macros referenced on this line. This might indicate recursion in the macro definitions.
5650 SPACE, TAB, "+", "-", "*", "/", "\", "|" characters not allowed in <marker> when using &SQL<marker>(...)<reverse-marker> syntax
5651 Cannot do property
5652 Cannot set method
5653 Compiled class '%1' does not exist
5654 Method '%1' does not exist
5655 Parameter '%1' does not exist
5656 Property '%1' does not exist
5657 Method '%1' has no return value
5658 Object instance required
5659 Property '%1' required
5660 Query '%1' does not exist
5661 Collection property '%1' is required so must have at least one member
5662 Relationship child/many property '%1' is required so must have at least one member
5663 Statement type (%1) is not supported in #sqlcompile mode=deferred.
5664 Attempt to reference instance variable '%1' in class method context.
5665 Macro Preprocessor (MPP) Function '%1' failed with an error: %2.
5701 Missing required name (macro compiler error)
5702 Missing left paren (macro compiler error)
5703 Missing right paren (macro compiler error)
5704 No equal sign after set left (macro compiler error)
5705 Unbalanced quotes (macro compiler error)
5706 Unbalanced parentheses (macro compiler error)
5707 Unbalanced #beginlit .. #endlit (macro compiler error)
5710 Unexpected #else (macro compiler error)
5711 Unexpected #elseif (macro compiler error)
5712 Unexpected #endif (macro compiler error)
5720 Unexpected end of line (macro compiler error)
5721 Unexpected end of file (macro compiler error)
5730 Incorrect delimiter (macro compiler error)
5731 External package named %1 not supported (macro compiler error)
5732 Macro nesting limit exceeded, check for circular macro reference (macro compiler error)
5733 No previous new for variable %1 (macro compiler error)
5734 Embedded file '%1' not found (macro compiler error)
5740 Compiling (macro compiler error)
5741 Compile Complete! (macro compiler error)
5742 Failed to file INT code (macro compiler error)
5743 Failed to file MAC code (macro compiler error)
5744 Module exceeded maximum PCODE size (macro compiler error)
5745 Compile Failed! (macro compiler error)
5746 Unable to split the code block, pcode is larger than %2 for routine '%1' (macro compiler error)
5747 Unable to split the code for routine '%1' as it is not INT code (macro compiler error)
5748 No current class context for #classcontext statement (macro compiler error)
5750 Security violation opening object '%1'
5751 Cannot access method '%1'
5752 Class '%1' is abstract
5753 Cannot instantiate abstract class '%1'
5754 Cannot instantiate datatype class '%1'
5755 Object '%1' is not registered
5756 Procedure name: '%1' is not valid
5757 Procedure: '%1' not found
5758 Method not implemented: %1
5759 Property is read only
5760 Fail to instantiate object instance: %1
5761 Fail to create new object instance: %1
5762 Class '%1' is read only
5763 Failed to create embedded object for '%1'
5764 %DeleteExtent could not delete all instances of '%1'
5765 Export was done on a system with a different locale: '%1'
5766 Invalid table name: '%1'
5767 Table already exists: '%1'
5768 Class already exists: '%1'
5769 Linking error: '%1'
5770 Object open failed because '%1' key value of '%2' was not found
5771 Object delete failed because '%1' key value of '%2' was not found
5772 Collection is read only
5773 Cannot set Identity property unless IDENTITY_INSERT option is on: %1
5774 Cannot update a previously assigned counter property value: %1:%2
5775 Unable to get a lock on class inheritance structure '%1' within timeout.
5795 Cannot acquire lock on referenced object for foreign key '%1' for '%2'
5796 Cannot acquire lock on referenced object for referenced key '%1'
5797 Instance of '%1' with '%2' key value = '%3' not found
5798 Failed to lock extent for exclusive access: '%1'
5799 Failed to lock extent for shared access: '%1'
General Error Codes - 5800 to 5999
Error Code Description
5800 Concurrency failure on update: object versions not the same for '%1'
5801 Cannot set serial
5802 Datatype validation failed on property '%1', with value equal to "%2"
5803 Failed to acquire exclusive lock on instance of '%1'
5804 Failed to acquire read lock on instance of '%1'
5805 ID key not unique for extent '%1' : '%2' exists. Id counter location = '%3'
5806 Lock type '%1' is invalid
5807 Oref '%1' is invalid
5808 Key not unique: %1
5809 Object to Load not found, class '%1', ID '%2'
5810 Object to Delete not found, class '%1', ID '%2'
5811 Nothing to load, class '%1', ID '%2'
5812 Null id, class '%1'
5813 Null oid, class '%1'
5814 Oid previously assigned, class '%1', ID '%2'
5815 Too many calls to close
5816 Transaction roll back failed
5817 No properties selected in query: %1
5818 Query is not closed
5819 Too many arguments
5820 Collection key '%1' is invalid
5821 Cannot instantiate query: '%1'
5822 Formal argument invalid: '%1'
5823 Cannot delete object, referenced by '%1'
5824 Object referenced by '%1' does not exist
5825 Not an instance of %1
5826 Class '%1' does not support '%2' interface
5827 Invalid cyclical dependency in save, class '%1'
5828 Concurrency must be an integer from 0 to 4
5829 Foreign Key constraint (%1) failed referential integrity check upon %2 in referencing extent
5830 Foreign Key constraint (%1) failed upon %3 of object in %2 (referential action of %4)
5831 Foreign Key constraint (%1) failed upon %3 of object in %2: At least 1 object exists which references key %4
5832 At least one component of the ID value for class %1 is Null: '%2'
5833 Value not an instance of property's type class: '%1::%2'
5834 ID counter value is invalid, check the messages log: '%1'
5835 You can not disconnect a collection that is already disconnected
5836 Property type class '%3' is abstract: '%1::%2'
5837 Null GUID: '%1'
5838 You need %Development:use privilege to run this application.
5839 Unable to add CSP item '%1' to project because it already includes '%2' which is same name but different case.
5840 Unable to import file '%1' as this is not a supported type.
5841 Unable to goto offset %1 in line %2 in file '%3' as line is not long enough.
5842 Unable to goto line %1 in file '%2' as file too short.
5843 Unable to instantiate user defined document '%1'.
5844 User defined document '%1' not supported. No user defined document class in this namespace.
5845 Item '%1' is not editable%2
5846 To use Studio you must have %Developer:Use privilege.
5847 You can not import the default project '%1'.
5848 You can not export the default project '%1', rename project then export it.
5849 Routine '%1' is of language type '%2' which is different to the language specified.
5850 You can not add/remove '%1' to this project as it already contains the package '%2'.
5851 Cannot modify library class
5852 Cannot save library class
5853 Invalid element type
5854 Invalid global reference %1
5855 Invalid oid prefix
5856 SQLBinding does not exist
5857 Storage sql map data name required
5858 Storage sql map name required
5859 Storage sql map row IDSpec name required
5860 Storage sql map subscript name required
5861 Package routine prefix is too long
5862 Package global prefix is too long
5863 Another user has '%1' open for editing.
5864 User '%2' in process '%3' has '%1' open for editing.
5865 Item '%1' is not checked out of source control%2
5876 Project does not have a Name
5877 Invalid type for project item: '%1'
5878 Name for project item is blank
5879 No stream data to import
5880 Unable to create source control class: %1
5881 Project '%1' does not exist
5882 Unable to create a new routine with name '%1'
5883 Item '%1' is mapped from a database that you do not have write permission on.
5885 The CSP/CSR page '%1' will be opened as Read Only because its source file is marked as Read Only.
5886 Can not save compiled dictionary classes.
5887 Can not delete compiled dictionary classes.
5888 Can not create new compiled dictionary classes.
5889 Not logged into source control system so this action is unavailable
5890 Routine name '%1' is too long
5891 Unable to copy this project to a new name
5892 Routine '%1' already exists and is of a different type to the current routine. Either rename your routine or delete the routine that already exists.
5893 The file '%1' is invalid and terminates before a valid %RO file should, the routine '%2' may be truncated.
5894 There are too many items in this file to return a list of the items correctly, the list of items is truncated.
5895 Item '%1' is mapped from another namespace, so you can not save it here.
5896 Bad template mode '%1' can be one of TEMPLATE,ADDIN,NEW.
5897 The source control class can not be changed from Studio, it is locked as '%1'.
5898 Unable to decode this global format due to it being too long.
5899 Unable to decode this global format is bad '%1'.
5900 Package name supplied was '%1' but the real package name was '%2', case in inconsistent.
5901 Rule family '%1' does not exist
5902 Rule '%1' does not exist
5903 Rule name is required
5904 Attribute '%2' is required for tag '<%1>' on line number %3
5905 The value of attribute %1, '%2', is invalid, on line number %3
5906 Session ID is missing
5907 Session ID '%1' does not exist
5908 Failed to create class '%1': %2
5909 There is no closing tag for the tag <%1> on line number %2
5910 Must relogin with two factor protocol.
5911 Character Set '%1' not installed, unable to perform character set translation
5912 Page '%1' does not exist
5913 HTTP response has an invalid Content-Type '%1'
5914 CSP Application '%1' does not exist
5915 Cannot allocate a license
5916 Illegal CSP Request
5917 HTTP method '%1' not supported by CSP
5918 You are logged out, and can no longer perform that action
5919 The action you are requesting is not valid
5920 Must use CSP page '%1' from namespace '%2' and not current namespace '%3'
5921 The CSP application '%1' must specify a namespace to run in
5922 Timed out waiting for response
5923 Redirected %1 times, appears to be a redirection loop
5924 An error occurred and the specified error page could not be displayed - please inform the web master
5925 <SCRIPT LANGUAGE=CACHE> tag is missing either RUNAT or METHOD attribute, on line number %1
5926 Unable to redirect as HTTP headers have already been written and flushed
5927 Unable to load page '%1' because its class name conflicts with the class '%2' that is already loaded
5928 Syntax error while parsing tag <%1> on line number %2
5929 Syntax error while parsing CSP directive on line number %1
5930 Include path type does not match filename specification on line number %1
5931 Can only call this method/set this value in OnPreHTTP() before page has started to be displayed
5932 Action not valid with this version of the Web Gateway on the web server
5933 The CSP Server had an internal error: %1
5934 The class '%1' referred to by the CSP:OBJECT tag '%2' on line %3 is not defined.
5935 The name of the HTML form, '%1', is longer than 25 characters on line %2.
5936 The HTML form '%1' is not bound to a valid csp object name on line %2.
5937 The object variable '%1' to which form '%2' is bound on line %3 is not defined.
5938 The tag name, '%1', is not unique in the form '%2' on line %3.
5939 The CSPBIND attribute for SELECT with QUERY must be a persistent object reference on line %1.
5940 CSP:OBJECT NAME attribute must be a valid identifier for tag '%1' on line %2.
5941 Multiple CHECKBOX tags cannot be bound to a single value field on line %1.
5942 %1 tag on line %2 has CSPBIND attribute, but is not in a bound form.
5943 SCRIPT LANGUAGE=SQL tag cannot have both NAME and CURSOR attribute on line %1.
5944 %1 attribute must be a valid identifier for %2 on line %3.
5945 MODE attribute must be DISPLAY, LOGICAL, ODBC or SYSTEM on line %1.
5946 Duplicate definition of SQL CURSOR '%1' on line %2.
5947 SQL CURSOR '%1' is not defined and is used on line %2.
5948 Duplicate definition of object '%1' on line %2.
5949 Duplicate definition of the rule '%1'.
5950 Class '%1' does not exist for rule '%2' on line %3.
5951 The csp:search tag '%1' may have ONSELECT specified only with OPTION=POPUP on line %2.
5952 The CSP rule version has changed - user rules need to be reloaded.
5953 Query method did not return a value: %1.
5954 Failed to lock CSP page.
5955 CSPAppList query: invalid data in Fetch().
5956 Directory '%1' for CSP Application '%2' does not exist
5957 CSPPageLookup: Search error.
5958 CSPPageLookup: CLASSNAME Missing.
5959 CSPPageLookup: WHERE Missing.
5960 CSPPageLookup: Unable to create result set.
5961 Unable to convert character set '%1'.
5962 Unable to allocate new session.
5963 Invalid SysLog level: %1.
5964 Language changed by page directive on line number %1
5965 Invalid language, '%1', specified on line number %2
5966 Unknown charset, '%1', specified on line number %2
5967 The CSP hyperevent request did not include a mandatory parameter so it can not be processed.
5968 CSR:RULE LANGUAGE attribute value, %1, is invalid in rule %2.
5969 Script tag language, '%1', does not match page language on line number %2
5970 Static SQL tags are not supported on Basic pages on line number %1
5971 An error occurred attempting to trade a CSP license for a named user license '%1'
5972 Invalid format for SaveCallback for form %1
5973 The CSP page '%1' is too large to load, we support pages up to 1.5Mb in size.
5974 The persistent session is no longer available because the server process does not exist
5975 Unable to lock session object as another process has this lock
5976 Direction attribute is not 'forward' or 'backward' on line %1.
5977 Direction part of WHERE, SELECT or ORDER attribute of csp:search must be ASC or DESC.
5978 Value of cspSaveMsgEscape attribute must be None, HTML or JS on line number %1.
5979 Session Id invalid.
5980 Preserve=1 mode only supported with a real web server.
5981 csp:include tag must include a PAGE attribute to specify the page to include.
5982 Only the SELECT SQL command is allowed in SCRIPT LANGUAGE=SQL tag on line %1.
5983 Page not found.
5984 In order to run pages in this application we need an authenticated user.
5985 Attempt to use a web session for service '%1' when session was started as service '%2'.
5986 Current user is not authenticated to run service '%1'.
5987 Methods that are defined in a CSP page must be classmethods on line %1.
5988 The session is only using cookies for session management, but the browser provided a CSPCHD argument to this session.
5989 System rules (name begins with %) and namespace local rules may not both be defined in the same file.
5990 Session id '%1' not found.
5991 Unable to create SOAP method %1
5992 You are not allowed to alter the SecurityContext property
5993 CSP error trap called with no error information available.
5994 The CSP application '%1' specifies a namespace '%2' that does not exist.
5995 Unexpected attribute, %1, on line %2.
5996 Unable to find CSP.ini CSP gateway file.
5997 Unable to find CSP gateway username in CSP.ini file.
5998 Unable to update the CSP.ini CSP gateway file.
5999 Expecting second portion of two factor authentication to finish login process.

Error Codes 6000 to 6999

General Error Codes - 6000 to 6199
Error Code Description
6000 Entered Security Token '%1' did not match sent token.
6001 Can not restore file '%1' because it contains OBJ routines
6002 File '%1' is not a %RO output file
6003 Unable to convert class format
6004 Unable to export class as XML
6005 Unable to import class from XML, details follow '%1'
6006 The XML file does not contain a recognized import format
6007 Unable to set 'Content-Length' header, since it's readonly.
6008 Unable to set 'Connection' header.
6009 Method not supported.
6010 Already connected.
6011 Need to be connected.
6012 No response from POP server: %1.
6013 Unable to make TCP/IP connection to mail server. An earlier connection may not have been closed.
6014 TCP/IP session already terminated.
6015 POP3 Server reported error: %1.
6016 Invalid response to %1 command: %2.
6017 Line read from mailbox should not be blank
6018 TCP/IP session unexpected error: %1.
6019 Attempt to find location failed
6020 Handler POP failed
6021 Handler PUSH failed
6022 Gateway failed: %1.
6023 Query not Prepared.
6024 Invalid %qacn.
6025 Gateway: Invalid connection handle.
6026 Gateway: Cannot allocate statement.
6027 NamespaceList query: invalid data in Fetch().
6028 Error in Macro Preprocessor: %1.
6029 Timed out waiting for response.
6030 '%1' property must be specified for SMTP.
6031 Unable to open TCP/IP connection.
6032 Unexpected initial message, server may not be SMTP server: %1.
6033 Error response to SMTP %1: %2.
6034 SMTP server connection failed during %1 command: %2.
6035 Output charset must be specified on Unicode system.
6036 Character > 255 not valid for quoted printable message
6037 Nothing imported.
6038 Failed to Initialize
6039 RetType not VOID or HRESULT
6040 RetType name not NULL
6041 No class to compile: %1
6042 Routine %1 object code not found
6043 Database contains class definitions: %1
6044 Cannot mount database: %1
6045 Illegal Export Directory Name
6046 Database doesn't exist: %1
6047 Invalid identifier format
6048 Invalid Statement Type: %1
6049 Invalid Dynamic Query formal parameter %1
6050 Invalid number of parameter values
6051 Error Generating INTO clause:
6052 Invalid conversion direction value
6053 Malformed serialized data
6054 A valid %MessageDictionary is not specified by '%1'
6055 No language specified.
6056 Unable to find translate table for output charset: %1.
6057 POP3 error: %1.
6058 MessageNumber must be specified.
6059 Unable to open TCP/IP socket to server %1
6060 Somebody else is using the Monitor.
6061 The Monitor is not running
6062 The Monitor is already running
6063 Memory allocation for the Monitor failed
6064 Could not enable statistics collection for Monitor
6065 Unable to open collection '%1'
6066 Invalid extension type on compile '%1'
6067 Problem rebuilding the class index
6068 Unable to find default XML catalog file '%1'
6069 Error loading global file '%1' : %2
6070 SMTP Send failed for all specified email addresses.
6071 Required argument missing
6072 Invalid License Key Data
6073 Could not open license key file '%1' for write.
6074 Invalid value for ContentTransferEncoding: %1
6075 %1 is not a block number.
6076 Block %1 is not a bitmap block.
6077 Can not compare routines '%1' and '%2' as they are different types
6078 No implementation in source control class for action %1 with document %2
6079 The class '%1' is not a valid Studio extension class.
6080 Can not export '%1' type in %RO format for item '%2'.
6081 XML exported abstract document data not formatted as CDATA.
6082 License upgrade error: '%1'.
6083 The operation is not licensed.
6084 Unknown errors detected, but no error code reported
6085 Unable to write to socket with SSL/TLS configuration '%1', error reported '%2'
6086 If Content-Type is message/rfc822, the only part must be a %Net.MailMessage.
6087 Content-Transfer-Encoding for attached email must be '7bit' or '8bit'.
6088 Invalid response from proxy '%1' on CONNECT command '%2'.
6089 CONNECT command to proxy '%1' failed with response '%2'.
6090 No boundary attribute specified for multipart Content-Type.
6091 Unexpected boundary line found at beginning of MIME body.
6092 Invalid MIME header format.
6093 Unexpected end of message found. Invalid MIME format.
6094 MIME message source must be defined using OpenFile or OpenStream.
6095 HTTP header name too long to store '%1'.
6096 Global name '%1' is not valid.
6097 Error '%1' while using TCP/IP device $zu(189,1)='%2'
6098 Unable to create temporary file for HTTP request
6099 SSLConfiguration must be specified if UseSTARTTLS is true.
6100 STARTTLS not supported for SMTP: %1.
6101 Com Exception: '%1'
6102 Com CoClass has no default Interface defined
6103 Com CoClass default interface does not support automation
6150 Unable to set new source control class as you do not have WRITE privileges needed update ^%SYS global
6151 Item '%1' is marked as read only by source control hooks.
6152 Unable to remove item '%1' from the project as is not present in the project.
6153 Email must be retrieved with Fetch before GetAttachedEmail is called.
6154 Connection to web server can not reuse existing socket as socket was closed to server '%1'.
6155 Unable to verify SSL/TLS connected to correct system as no SSL certificate present for this socket.
6156 No match between server name '%1' and SSL certificate values '%2'.
6157 Unable to save CSP file '%1' because temp file '%2' was not created, check directory permissions.
6158 Unable to use fulldeploy on class '%1' because it is a subclass of %SwizzleObject or %XML.Adaptor.
6159 Although Https property is enabled no SSLConfiguration is specified so unable to make an HTTPS connection to '%1'.
6160 HTTP request redirected to HTTPS address but no SSLConfiguration is specified so unable to make an HTTPS connection to '%1'.
6161 HTTP request redirected to server '%1' at location '%2' which then reported the embedded error.
6162 Unable to create HTTP Authorization header for %1 scheme.
6163 Authentication error for %1 scheme.
6164 External Interrupt request failed with an error: %1
6165 Path associated with cookie '%1' is too long, maximum supported is 510 characters and it is '%2' characters for path '%3'.
6166 Server does not support authentication.
6167 Authentication expected but failed.
General Error Codes - 6200 to 6399
Error Code Description
6201 Cannot Create Object: %1
6202 Cannot Create Message Handler: %1
6203 Unexpected Element
6204 SOAP message contains prohibited processing instruction
6205 Element must be namespace qualified
6206 Version Error, namespace must be %1.
6207 Unexpected SOAPACTION value: %1
6208 Unexpected Attribute
6209 Wrong number of Attributes
6210 Invalid Attribute value
6211 Missing Attribute
6212 Incorrect Attribute namespace
6213 Attribute namespace not in scope
6214 Attribute NOT qualified
6215 Attribute value NOT qualified
6216 Unsupported Transport
6217 Add Operation Failed
6218 Duplicate Element
6219 Unknown Error
6220 Internal Server Error
6221 Mandatory Header NOT supported: %1
6222 Invalid SoapBindingStyle keyword '%1' for WebMethod %2.
6223 Invalid SoapBodyUse keyword '%1' for WebMethod %2.
6224 Arguments to a Web Service may not be of type: %1.
6225 A DTD cannot be generated for class: %1.
6226 Argument, %1, of WebMethod, %2, must be a simple type or SOAP enabled.
6227 Server Application Error
6228 Badly formed SOAP Message
6229 XMLPROJECTION value is inconsistent with type of property: %1.
6230 Invalid value for XMLPROJECTION of property: %1.
6231 Invalid format for %XML.Adaptor: %1.
6232 Datatype validation failed for tag, %1, with value: %2
6233 XML input is not in proper format for tag: %1.
6234 Required tag not present: %1
6235 Unexpected namespace for tag: %1.
6236 Referenced id not found, %1, for tag: %2.
6237 Unexpected tag in XML input: %1.
6238 Key attribute not specified for an array tag: %1.
6239 Only one property may have XMLPROJECTION = content
6240 SERVICENAME must be specified by overriding the SERVICENAME parameter.
6241 The SOAP WebClient LOCATION parameter must specify http or https transport.
6242 HTTP request to SOAP WebService returned unexpected status: %1.
6243 HTTP request to SOAP WebService returned response with unexpected CONTENT-TYPE: %1.
6244 The location of the web service must be specified.
6245 Client Web Method may not have an argument beginning with %: %1.
6246 No response to SOAP request.
6247 Unexpected encoding of SOAP response.
6248 SOAP response is a SOAP fault: %1
6249 A class referenced by an XMLENABLED class must be a subclass of %XML.Adaptor: %1
6250 Collection property requires ELEMENTTYPE parameter in referenced class: %1
6251 Cannot find message element '%1' in XML namespace '%2'
6252 Datatype validation failed because no value found for tag, %1.
6253 Datatype validation failed for tag %1. Unexpected tag <%2> found.
6254 Tag expected, XML input, %1, is not in proper format as child of %2.
6255 XML is not in proper format for DataSet record in field '%1', %2.
6256 SubstitutionGroup for property '%1' is inconsistent with previous substitutionGroup.
6257 XMLCHOICELIST for property '%1' may not contain literal type '%2'.
6258 Invalid ENCODING parameter '%1' for property '%2'.
6259 XMLPROJECTION for property '%1' may not be ID unless this property is a persistent object.
6260 Datatype validation failed for attribute, %1, with value %2 for element %3.
6261 Unexpected value for XMLIGNORENULL class parameter: %1
6262 Invalid value for XMLIO of property: %1.
6263 Invalid value for XMLREFERENCE of property: %1.
6264 Invalid value for XMLTYPECONSTRAINT of property: %1.
6265 XMLREFERENCE and XMLTYPECONSTRAINT may be specified only for class references for property: %1.
6266 XMLTYPECONSTRAINT may not be specified with XMLREFERENCE = ID for property: %1.
6267 XMLSUMMARY must a comma separated list of class properties.
6268 Invalid value for XMLDEFAULTREFERENCE.
6269 CLASS and QUERY must be specified for a typed dataset.
6270 Duplicate WebMethod name not allowed: %1.
6272 The QUERYNAME parameter and the classname (or XMLNAME override) may not be the same.
6273 An %XML.DataSet cannot have the QueryName and DataSetName properties.
6275 Cannot output a new XML document or change %XML.Writer properties until the current document is completed.
6276 A root element must be written to contain child elements.
6277 Type attribute, %1, does not specify valid type for XML input tag: %2.
6278 XML output string is not available.
6279 XML output string length is greater than the maximum string length.
6280 An %XML.DataSet cannot be directly executed to get the query result.
6281 %1 of class %2 must be able to differentiate child classes of %3.
6282 Malformed SOAP Body in response.
6283 Unexpected session cookie in session header.
6284 Security header error: %1.
6285 Cannot call EndDocument unless StartDocument called.
6286 Root element, processing instruction or DOCTYPE may not be in root element.
6287 Attribute may only be called immediately after Element or RootElement.
6288 Invalid schema for %XML.Dataset at element '%1', %2.
6289 Dataset schema does not match the specified typed %XML.Dataset: %1, %2 : %3 '= %4.
6290 Dataset schema must be in XML input if %XML.Dataset is not typed.
6291 Dataset name, row name and XML namespace must match XML schema for %XML.Dataset.
6292 %XML.Dataset may not have duplicated column name: %1.
6293 Unable to load translate table '%1' for charset '%2'.
6294 Cannot find message part in schema: %1
6295 Internal error in XML Schema Wizard: %1
6296 XML export cycle found in class: %1
6297 Invalid value for XMLSTREAMMODE of property: %1.
6298 XMLSTREAMMODE is not permitted for property %1, since it is not a character stream.
6299 XMLNAME does not specify a valid XML name for property %1.
6300 Invalid value for XMLFORMAT.
6301 SAX XML Parser Error: %1
6302 XML message file format invalid at Line %1 Offset %2.
6303 Content Handler is NOT a subclass of %XML.SAX.ContentHandler
6304 Unable to export item '%1' because XML export does not support items of this type. Will skip this item.
6305 Unable to export item '%1' because can not instantiate user defined document type '%2'. Will skip this item.
6306 CSP page '%1' does not have an associated application, skipping this item.
6307 CSP file '%1' associated with page '%2' does not exist, skipping this item.
6308 Item '%1' is invalid or does not have any data to export, skipping this item.
6309 Class '%1' is in deployed mode and so can not be exported, skipping this item.
6310 URL '%1' is malformed and cannot be processed
6311 Schema definition for namespace '%1' does not exist.
6312 Unable to find default namespace for class '%1'.
6313 Schema moniker type '%2' (from schema '%1') is invalid.
6314 SAX XML Parser Warning: %1
6315 Errors reporting importing XML subelement in file '%1' at line '%2' offset '%3', skipping this item.
6316 No subdocument to import, skipping this item.
6317 Invalid value for XMLINHERITANCE: %1.
6318 Property required in XML document: %1
6320 Unexpected value for fixed attribute, %1, with value %2 for element %3.
6321 Only CreateSequenceResponse response to WS-ReliableMessaging CreateSequence request is supported: %1.
6322 Unsupported value of IncompleteSequenceBehavior in CreateSequenceResponse message: %1.
6323 Unexpected WS-ReliableMessaging header: %1
6324 WS-ReliableMessaging Sequence header expected but not present
6325 WS-ReliableMessaging response Sequence header LastMessageNumber does not match request Sequence header
6326 Only CloseSequenceResponse response to WS-ReliableMessaging CloseSequence request is supported: %1.
6327 Only TerminateSequenceResponse response to WS-ReliableMessaging TerminateSequence request is supported: %1.
6328 A %SOAP.RM.CreateSequence object may only be used once to call %StartRMSession in order to start an RM session.
6350 SoapMessageName keyword may only be specified for a web service method: %1.
6351 SoapAction keyword may only be specified for a web service method: %1.
6352 Invalid value for HttpRequester: %1.
6353 Unexpected attributes for element %1: %2
6354 If a property is not of type string and has XMLPROJECTION = content, then all other properties must have XMLPROJECTION = attribute.
6355 SOAP message has no body.
6356 Invalid node type: %1.
6357 Parent node may not be set directly.
6358 Error scanning tree: element expected.
6359 Binary SOAP protocol may not be used with %SOAP.WebRequest.
6360 Unexpected class, %1, received for binary SOAP protocol. %2 expected.
6361 Class must be XML enabled: %1.
6362 Duplicate definition of XML schema %1 %2 for class %3.
6363 Inconsistent use of encoded format for XML namespace %1.
6364 Inconsistent definition of ELEMENTQUALIFIED or ATTRIBUTEQUALIFIED for classes in namespace %1.
6365 Invalid format of SOAP binary %1.
6366 Unexpected top logical block: %1.
6367 Unexpected SOAP binary version number: %1.
6368 Duplicate definition of class, %1, in SOAP binary message.
6369 Object instance refers to unknown class with index %1 in SOAP binary message.
6370 Duplicate specification of SOAPCLASSNAME for class %1.
6371 ServiceName must be specified in SOAPCLASSNAME for class %1.
6372 Multipart MIME SOAP message received with unexpected Content-Type header field: %1. Only SOAP with Attachments and MTOM are supported.
6373 The SOAPVERSION parameter specifies an unsupported SOAP version: %1.
6374 SOAP version %1 is not supported for this web client.
6375 SOAP encodingStyle %1 is not supported.
6376 Mandatory Header NOT supported
6378 Invalid value for SECURITYIN parameter: %1
6379 WS-Security header is required.
6380 Format of certificate file is invalid: %1.
6381 Unsupported Encryption algorithm for WS-Security: %1.
6382 Key encryption failed: %1.
6383 Encryption failed: %1.
6384 Invalid value for XMLMAPPING.
6385 XMLPROJECTION as attribute or content not allowed for XMLMAPPING="sequence".
6386 XMLPROJECTION must be "group" when referencing class with XMLMAPPING="sequence": %1.
6387 ARGUMENTSTYLE must be either "wrapped" or "message": %1.
6388 Unexpected element in SOAP message: %1.
6389 Unable to create security element: %1.
6390 Signature validation failed: %1.
6391 Invalid WS-SecureConversation DerivedKeyToken: %1.
6392 Only RequestSecurityTokenResponseCollection response to WS-SecureConversation RequestSecurityToken request is supported: %1.
6393 RequestSecurityTokenResponseCollection response to WS-SecureConversation RequestSecurityToken request with no elements is not supported.
6394 Unexpected %1 in SecurityTokenRequestResponse: %2.
6395 %1 element is not supported in SecurityTokenRequestResponse.
6396 SecurityContextToken not returned in SecurityTokenRequestResponse.
6397 Invalid SecurityContextToken in SecurityTokenRequestResponse: %1."
6398 SecurityContextToken has no associated key.
6399 Unexpected SecurityTokenRequestResponse to cancel request.
General Error Codes - 6400 to 6599
Error Code Description
6401 Element '%1', invalid attribute '%2'
6402 Element '%1', attribute '%2' has invalid value %3
6403 Element '%1' contains invalid attributes
6404 Element '%1', invalid
6405 Element '%1' has invalid value '%2'
6406 Specified namespace '%1' is invalid, MUST be '%2'
6407 Cannot deduce Schema Type - No valid correspondence found
6408 Cannot deduce Message Type - No valid correspondence found
6409 Unsupported encoding '%1'
6410 Element '%1', required attribute '%2' is missing
6411 Element '%1' is missing
6412 Element '%1' - cannot determine %2 for operation %3
6413 Element '%1' - corresponding %2 %3
6414 Element '%1' - duplicate name '%2'
6415 Element '%1' - unsupported transport '%2'
6416 Element '%1' - unrecognized %2 element '%3'
6417 Element '%1' - message '%2' type or element attribute must be specified for a part.
6418 Element '%1' - message '%2' parameters not found for literal encoding
6419 Element '%1' - inconsistent %2 for operation %3
6420 Element '%1' - parts list contains an undefined or multiply defined part name.
6421 Element '%1' - %2 ParameterOrder parameter count mismatch
6422 WSDL namespace is not defined for targetNamespace = %1.
6423 SOAP namespace is not defined for targetNamespace = %1.
6424 Element '%1' - message '%2' both type and element attribute may not be specified for a part.
6425 Element '%1' - message '%2' Message Style must be used for document style message with 2 or more parts.
6426 Both the Client and the Service class cannot be in the same package: %1.
6427 Client class not defined: %1.
6428 Cannot define configuration for client class, %1, since it is already configured by %2 which configures multiple classes.
6429 The specified WSDL must have exactly one port which will supply the policy for %1.
6440 Unexpected root element, %1, in %SOAP.Configuration XData block,%2.
6441 Unexpected element, %1, in %3 XData block, %2.
6442 Duplicate name of %SOAP.Configuration XData block: %1.
6443 Duplicate configuration name, %1, for SOAP class, %2.
6444 SOAP class name not specified for service in configuration: %1.
6445 Method name not specified for method element in configuration: %1.
6446 Duplicate method name, %1, in configuration, %2.
6447 Unexpected element, %1, from WS-Policy namespace in %SOAP.Configuration XData block, %2.
6448 Name attribute of configuration, %1, does not match name of %SOAP.Configuration XData block, %2.
6449 Invalid SOAP configuration class name %1.
6450 Configuration not found, %1, in %SOAP.Configuration class, %2.
6451 A policy assertion, %1, may not have text children in %SOAP.Configuration class, %2.
6452 Internal error while analyzing policy in configuration %1: %2.
6453 Unsupported assertion namespace "%1", assertion=%2, configuration=%3.
6454 No supported policy alternative in configuration %1.
6455 Policy assertion %1 is not supported in configuration %2.
6456 Policy assertion %1 is not recognized in configuration %2.
6457 Policy assertion %1 may not have wsp:Policy child element in configuration %2.
6458 Policy assertion %1 has unsupported parameter %2 in configuration %3.
6459 Policy assertion %1 Header parameter requires Namespace attribute in configuration %2.
6460 Policy assertion %1 Header parameter requires Name attribute in configuration %2.
6461 Policy assertion %1 does not support nested policy assertion %2 in configuration %3.
6462 Policy assertion %1 requires a nested policy in configuration %2.
6463 Policy assertion %1 is not in expected namespace in configuration %2.
6464 Only one %1 may be specified in configuration %2.
6465 No assertion parameters are supported for token %1 in configuration %2.
6466 Unsupported token %1 in %2 assertion in configuration %3.
6467 %1 requires AlgorithmSuite assertion in configuration %2.
6468 Token %1 format error in configuration %2.
6469 Unexpected value for sp:IncludeToken %1 in configuration %2.
6470 %1 requires one %2 token in configuration %3.
6471 %1 requires at least one token in configuration %2.
6472 %1 element is not in expected namespace, in %3 XData block, %2.
6473 Unexpected attribute %1 in %2 element in configuration %3.
6474 Both cfg:FindField and cfg:FindValue must be specified if either is specified for sp:X509Token in configuration %1.
6475 Unexpected value of cfg:FindField, %1, for sp:X509Token in configuration %2.
6476 No local URI attribute for wsp:PolicyReference element in configuration %1.
6477 URI attribute, %1, for wsp:PolicyReference element does not reference a policy in configuration %2.
6478 sp:Username token is not valid for a supporting token with sp:SignedParts or sp:EncryptedParts assertion.
6479 cfg:wsdlElement="%1" does not specify a valid value for wsdlElement in configuration %2.
6480 Method name not specified for method element in parameters XData in class: %1.
6481 Method named %1 in method element of parameters does not exist in class %2.
6482 Header element requires %1 attribute in class %2.
6483 Conflicting DerivedKey assertions for %1 in configuration %2.
6484 Action element requires non-empty value in class %1.
6485 Only one SecurityContextToken may be specified for %1 in any alternative in configuration %2.
6486 Value of cfg:Lifetime, %1, for sp:SecureConversationToken must be in hours as a floating point number in configuration %2.
6487 Value of %1 parameter, %2, is not of expected type, %3, in configuration %4.
6501 Unrecognized XSD type '%1'
6502 Cannot determine corresponding class type for specified XSD type '%1'
6503 Lock timeout. XML projection failed for class '%1' trying to lock '%2' with timeout '%3'
6504 XML projection of an array of streams is not supported in property: %1.
6505 SOAP session failure: new session created since session specified in session header was not found.
6506 No schema definition was found in specified file.
6507 Invalid value for XMLNILNOOBJECT, %1.
6550 Cannot open QR Code %1 file %2.
6551 Cannot open QR Code exception file %1.
6552 QR Code file %1 not created.
6553 Invalid correction level %1, must be one of 'L', 'M', 'Q', or 'H'.
6554 QR Code not supported on this platform.
6555 QR Code invalid Dimension parameter %1.
6556 QR Code Correction Level %1 supports string length of %2, size of string is %3.
6557 The QRCode string %1 may not have been correctly escaped. The partial QR Code is in the file %2.
General Error Codes - 6600 to 6799
Error Code Description
6601 BeanName is required.
6602 RootDir is required.
6603 ClassPath is required.
6604 App Server Home is required. (APPSERVERHOME is "".)
6605 Java Home is required.
6606 Path is required.
6607 ServerType is required.
6608 We only support QuickStatement interface.
6609 %1 is neither Persistent nor a Session Bean. ClassList is %2. ClassList must contain only Persistent or Session Bean classes.
6610 ClassList must be specified in projection or in calling this routine. ClassList must not be empty.
6611 This server whose name is %1 is not defined in the EJB Wizard. Please pick one of WEBLOGIC, WEBLOGIC7, WEBLOGIC8, JBOSS, JBOSS3 or PRAMATI. JBOSS generates code for JBOSS 2.4.3 and 2.4.4 and JBOSS3 generates code for JBoss 3.X. For WebLogic 6.1 use WEBLOGIC, for WebLogic 7.0 use WEBLOGIC7, and for WEBLOGIC 8.1 use WEBLOGIC8. Please read your release notes for the list of supported servers.
6612 CMP generator for Class=%1 failed: CMP generation is only supported on classes with primary keys.
6613 Common CPP output not set
6614 getClassMethodsError: %1 className=%2
6615 getClassPropertiesError: %1 className=%2
6616 getClassQueriesError: %1 className=%2
6617 getEJBClassNameError: %1 className=%2
6618 getEJBClassNameError: %1
6619 Common output not set
6620 Common language generator object not set
6621 EJB Easy projection is only supported on Windows. On UNIX® use EJB.
6622 PersistenceType must be BMP or CMP.
6623 CMP generation for Class=%1 failed. CMP generation can only be done if all required properties are CMP compatible. Property=%2 is not CMP compatible.
6624 EJB generation for ClassList=%1 failed. ClassList must include at least one persistent class that is not a session bean.
6625 WebLogic requires a testable to be defined to test connection existence in connection pooling.
6626 Class %1 is not projectible. Projection is aborting. If the super of a class is not a %RegisteredObject and all the methods of the super are server-only and the class has some methods that are not class methods then it is not projectible. If the super of a class is null then the class must contain only class methods.
6627 %1 is not a valid value for TRANSACTIONISOLATION valid values are TRANSACTION_READ_UNCOMMITTED, and TRANSACTION_READ_COMMITTED.
6628 Class %1 is not projectible. Projection is aborting. For a class to be projectible all methods in the class must have the same signature in the left-most super. There is a conflict on Method %2.
6629 Class %1 is not projectible. Projection is aborting. For a class to be projectible all properties in the class must have the same declaration in the left-most super. There is a conflict on Property %2.
6630 Class %1 is not projectible. Projection is aborting. For a class to be projectible its left-most super %2 must be a %Library.RegisteredObject or class %1 must be a "static" class: a class that has only class methods and no properties or instance methods.
6631 Persistent Class %1 is not projectible. Projection is aborting. For a persistent class to be projectible its left-most super %2 must be a %Library.Persistent.
6632 Class %1 is not up-to-date. Please recompile the class and try again.
6633 Class %1 is not projectible to EJB. Projection is aborting. For a class to be projectible all its child tables must be valid. Child table %2 is not valid.
6634 getClientClassDefError: %1 className=%2
6635 QueryGetInfoError: %1, className=%2, query=%3
6636 Class %1 is a datatype and cannot be projected
6637 It is not valid for a format flag to contain / (back-slash). The invalid format flag is %1.
6638 The List that %1 is attempting to return on Class %2 is too big
6639 getCountMethodsError: %1 className=%2
6640 getCountPropertiesError: %1 className=%2
6641 getCountQueriesError: %1 className=%2
6642 Aborting EJB Projection of %1 because property %2 is required and yet is not supported by the EJB Wizard.
6643 Class %1 is not exportable. It should extend %Compiler.LG.Exportable to be exportable.
6645 %1: %2 className=%3
6646 JAVAPACKAGE parameter conflicts with clientname parameter. JAVAPACKAGE is %1 and clientname parameter is %2
6647 Server side code generation is not available. Please use cpp_generator for client side code generation.
6648 Cannot generate code for class %1 because depends on class %2 which has a problem in its generation.
6649 Cannot generate code for class %1 because depends on class %2 which cannot be generated for reason: %3.
6650 Cannot generate code for class %1 because depends on class %2 which is serveronly class.
6651 Skipping generation of class %1 because it depends on something that is not projectable and is not serveronly. Here is more information. %2
6653 Class %1 has an empty JavaBlock
6654 Class %1 has more than one JavaBlock
6655 Cannot project %1 because super %2 is collection.
6656 Cannot project %1 as POJO because method %2 has ByRef argument.
6657 Cannot project %1 because method %2 has abstract stream in return type or argument type.
6658 Cannot project %1 because left-most super %2 is a stream.
6659 Timed out waiting for lock on cache for class %1
6660 QueryGetParamInfoEror: %1, className=%2, query=%3
6701 Already Attached
6702 Missing PID value
6703 Invalid PID value
6704 Target has exited debugger
6705 Could not issue break to target
6706 Error attaching to CSP server: %1
6707 Not Attached
6708 Error unattaching from target
6709 Target not stopped
6710 Could not attach to target
6711 Invalid debugger target: %1
6712 Unable to find mapping for breakpoint '%1'
6713 Start target failed
6714 Debugger Error: %1
6715 Invalid PID value '%1'
6716 Target already in debug mode
6717 Target in signon mode
General Error Codes - 6800 to 6999
Error Code Description
6901 XSLT XML Transformer Error: %1
6902 Error Handler is NOT a subclass of %XML.XSLT.ErrorHandler
6903 Output Stream is NOT a subclass of %BinaryStream
6904 Result Handler is NOT a subclass of %XML.XPATH.ResultHandler
6905 Input Stream is NOT a subclass of %BinaryStream
6906 %New() should NOT be called directly, use 'Create...' factory methods

Error Codes 7000 to 7999

General Error Codes - 7000 to 7199
Error Code Description
7001 TSQL compiler error: %1
7002 TSQL: %1
7003 ISQL compiler error: %1
7004 ISQL: %1
7005 TSQL querybuilder expected "%1" (got "%2")
7006 You can't assign the result of a query to a variable
7011 TSQL language mode requires procedureblock: '%1::%2'
7050 Error opening class definition for "%1": "%2"
7051 Unrecognized input: "%1"
7052 Read: Missing "]"
7053 Read: Missing quote at end of string
7054 Read: Syntax error at or around "%1"
7055 RunQuery: Procedure "%1" is not a query
7056 RunQuery: Argument "%1" has already been passed (as "%2")
7101 Specified Seek position (%1) is past end of file (%2)
7102 FileStream Mode %1 does not include Read mode setting
7103 FileStream Mode %1 does not include Write mode setting
7104 No delegated input stream is bound to this MetaStream
7105 No Translation Table mapping found for CharEncoding '%1'
7106 IO Stream class %1 is not closeable
7107 Delegated IO Stream class %1 is not Seekable
7108 Object of type %1 is not a Stream object
7109 Timed out after %2 seconds trying to open stream '%1'
7110 Timed out after %2 seconds listening for an incoming connection on socket '%1'
7150 Telnet Option %1 is not set
7151 Error in telnet handshake; state=%1,current byte=%2
7152 Timeout attempting telnet initialization handshake
General Error Codes - 7200 to 7399
Error Code Description
7200 Datatype value '%1' failed IsValidDT validation
7201 Datatype value '%1' length longer than MAXLEN allowed of %2
7202 Datatype value '%1' length less than MINLEN allowed of %2
7203 Datatype value '%1' greater than MAXVAL allowed of %2
7204 Datatype value '%1' less than MINVAL allowed of %2
7205 Datatype value '%1' not in VALUELIST '%2'
7206 Datatype value '%1' is not a valid boolean
7207 Datatype value '%1' is not a valid number
7208 Datatype value '%1' is not a valid timestamp format
7209 Datatype value '%1' does not match PATTERN '%2'
7210 Datatype value '%1' contains invalid character/s '%2'
7211 Datatype value '%1' is not a valid duration
7212 Datatype value '%1' is not a valid uniqueidentifier/GUID format
7300 Failed to open logfile %1 for output
7301 Backup.General.ExternalFreeze cannot run with switch 10 or 13 already set
7302 Failed to locate TCP information for all cluster members
7303 Failed to switch journal files on other cluster members
7304 Failed to switch journal file. Status = %1
7305 Failed to switch local journal file. Status = %1
7306 System failed to quiesce
7307 Failed to place journal marker
7308 Task %1 does not exist
7309 Backup is currently running
7310 Failed to open task %1
7311 No backup recorded for task %1
7312 Unknown platform in $zversion(1)
7313 Error building list of log files: %1
7314 Error building list of tasks: %1
7315 Unable to determine base directory from: %1
7316 Unable to create directory for storing the log file: %1
7317 Unable to determine base directory for: %1
7318 Unable to create backup output directory: %1
7319 Failed to set up list of databases for backup
7320 Unknown backup type: %1
7321 Database %1 does not exist
7322 IRISTEMP cannot be included in a backup
7323 Error building list of databases: %1
7324 %1 is not part of the current backup list
7325 Failed to start backup job
7326 Failed to initialize IJC Device: %1
7327 BACKUP^DBACK returned failure
7328 Cannot modify a built-in system task
7329 Invalid backup type: %1
7330 Taskname not specified as argument to %New
7331 Taskname must contain only alphanumeric characters
7332 Task already exists
7333 No backup volume specified
7334 Unable to read file, Backup or Restore is in progress
7335 Cannot open backup volume '%1'
7336 This is not a %1 Backup File
7337 Request to suspend write daemon cleared
General Error Codes - 7400 to 7599
Error Code Description
7400 TASKMGR is already running
7401 Unable to open task (%1)
7402 Selected User (%1) is not enabled
7403 Task (%1) is not scheduled to run
7404 Multiple times per day but DailyIncrement is 0
7405 Operation requires %1 to change the task username
7406 User does not exist (RunAsUser %1)
7408 DailyEndTime must be after DailyStartTime
7409 EndDate must be after StartDate
7410 TimePeriodDay must be null or contain values 1 through 7 (%1) is not valid
7411 Output Directory does not exist
7412 Filename is not valid
7413 Task Class is required but is null
7414 Task Class (%1) does not exist in %2
7415 Could not find task to delete
7416 Unknown Scheduling problem, New Time = Last Time
7418 Failed to mark task as suspended (SQLCODE=%1)
7419 Failed to mark task as resumed (SQLCODE=%1)
7420 Invalid Suspend Flag (FLAG=%1)
7421 Unable to send mail. The Mail Server is not defined.
7422 Unable to send mail. No email addresses are defined.
7423 Failed to update configuration for (%1) with error %2
7424 Failed to send email (%1)
7425 Unable to delete task, clear all run after references first
7426 At least 1 Run day Monday - Sunday must be selected
7427 Task repeating offset must be a positive integer
7428 Invalid day of the month (%1)
7429 Invalid weekly offset use 1 - 5
7430 Invalid frequency time (DailyFrequencyTime) use 0 or 1
7431 Run After Task value is required
7432 Start Date and Time must be after the current date and time
7450 Task job running
7451 Task job untrapped error (%1)
7452 Task job setup error (%1)
7453 Task job timeout error
7454 Task job post process error (%1)
7460 Must enter a tape device.
7461 Enter a valid number of days
7500 SSH %3 Error '%1': %2
General Error Codes - 7600 to 7799
Error Code Description
7600 Invalid global format to import from
7601 Unknown package format type: %1
7602 Exported on version '%1' but this machine on version '%2' so unable to import
7603 Delimited id's setting on exported version %1 on current system %2 so unable to import
7604 Global node collision with class '%1'
7605 Unable to deploy routine '%1' with no source (as specified by removesource parameter) as there is no OBJ code
7606 Global node already in use '%1'
7607 Original data value at %1=%2 new value %3
7608 New data has %1=%2 but in original global this does not exist
7609 File '%1' does not contain an exported deployment
7610 Signature on code '%1' incorrect so this item is not original released version
7700 Invalid manifest specification '%1'
7701 Invalid expression '%1': %2
7702 Invalid special variable '%1'
7703 Parser error parsing '%1' at offset %2: '%3'
General Error Codes - 7800 to 7999
Error Code Description
7800 Unable to start any worker jobs
7801 Another job is modifying worker numbers
7802 Worker job/s unexpectedly shut down
7803 Job complete queue unexpectedly closed
7804 Lock table full, aborting
7805 Unable to create workers when we already have work being processed
7806 Unable to signal all workers
7807 Not all worker jobs started, was attempting to start '%1'
7808 Can not count worker jobs because unable to get a lock
7809 Unable to create workers in a worker process
7810 Work queue API being called using an invalid queue name '%1' for $job='%2'
7811 Unable to find classname for '%1' call
7812 Work queue unexpectedly removed, shutting down.
7813 Work queue received bad response from worker, shutting down.
7814 Worker jobs not processing any work, so process appears to be stalled, shutting down.
7815 Work queue not initialized, either due to a previous error causing a shutdown, or no call to Initialize before queuing work.
7850 Class '%1' is classtype=system but this does not support any '%2' members
7851 Classtype=system classes can only inherit from other classtype=system classes. Super class path '%1'.
7852 Classtype='%1' is not a valid classtype. Valid values are '%2'.
7853 Classtype=system classes do not support generator methods '%1'.
7854 C++ method '%1' in class '%2' can not support alias methods associated with property '%3'.
7855 C++ method '%1' in class '%2' returntype not supported '%3'.
7856 C++ method '%1' in class '%2' argument type not supported '%3'.
7900 Service '%1' not enabled for application '%2'
7901 Second Factor Login Failed for application '%1'
7902 OnApplication callback aborted the application change and the login process
7903 Second Factor cancelled by user
7904 Can not call on class that is not subclass of %ZEN.Mobile.basePage and not mobile enabled '%1'
7905 Invalid method to call on mobile page '%1'
7906 Session event callback prevented session from being created.
7950 The WebSocket Read operation has timed out
7951 The Client has closed the WebSocket

Error Codes 8000 to 8999

General Error Codes - 8000 to 8199
Error Code Description
8000 Domain %1 already exists
8001 Invalid SortField %1
8002 Global name '%1' is reserved
8003 Failed to process source
8004 Failed to acquire lock on domain %1
8005 External Id not found for internal id %1
8006 Configuration %1 does not exist
8007 Failed to initialize DirectInput
8008 Failed to initialize Indexer
8009 Failed to load KB %1
8010 Failed to load LB %1
8011 KB %1 Not Found
8012 %1: Caught Error %2
8013 Lister alias '%1' already in use by class %2 in this namespace
8014 Failed to reset %1 from location %2
8015 Nothing to process
8016 Configuration with id %1 does not exist
8017 Domain name and id do not match
8018 Domain %1 does not exist
8019 Domain %1 is corrupt
8020 Domain %1 must be opened in namespace %2
8021 Domain with id %1 does not exist
8022 Internal datasource error
8023 Failed to delete source %1
8024 Invalid Type: %1
8025 Missing Source Id
8026 Missing Source Field %1 in source %2
8027 Missing Continuation Key in source %1
8028 Missing Crc Field %1 in source %2
8029 Missing Sentence Field %1 in source %2
8030 Missing Relation Frequency in source %2
8031 Missing %1 Attribute in source %2
8032 Search string must be at least %1 characters long
8033 Source not specified
8034 Source does not exist (srcId: %1)
8035 Source does not exist (extId: %1)
8036 No metadata field specified
8037 Metadata field does not exist (field ID: %1)
8038 Metadata field does not exist (field name: %1)
8039 Supplied metadata value '%1' not allowed for MD Domain %2
8040 Metadata field '%1' already exists in this domain
8041 Dictionary %1 does not exist
8042 Dictionary item %1 does not exist
8043 Dictionary term %1 does not exist
8044 Dictionary element %1 does not exist
8045 Dictionary item with URI '%1' already exists
8046 Dictionary format class %1 does not exist
8047 Internal error indexing dictionary terms
8048 Metadata operator '%1' not supported for field %2
8049 Metadata LOV %1 does not exist
8050 Failed to convert buffer text to lower case
8051 Failed to create encoding object for %1
8052 Failed to transcode string
8053 Invalid indexer id specified
8054 Unknown language id specified
8055 Invalid object id specified
8056 Failed to open file %1
8057 Cannot index with no KB loaded
8058 Indexer returned a data item larger than the maximum supported
8059 Indexer failed while attempting to return output data
8060 An invalid data processing object was passed to the indexer
8061 Configuration %1 exists
8062 Languages must be in $list format
8063 Language %1 does not exist
8064 Failed to load library: %1
8065 Unable to instantiate iKnow Engine
8066 Failed to lock iKnow Indexer
8067 Can't open Lister id: %1
8068 Ngram search is not enabled for this domain
8069 Cannot overwrite an existing MD value in batch mode
8070 Supplied metadata value count (%1) does not correspond to key count (%2)
8071 Unable to open Converter id: %1
8072 Unable to open Processor id: %1
8073 There are still lists scheduled for a Batch load. Process them first or call Loader.Reset()
8074 Indexer process failed
8075 Failed to create Loader instance
8076 Failed to split External ID: %1
8077 Unknown Lister class or alias: %1
8078 BuildExtIdFromName() should be called for an implementing Lister class, not the abstract one
8079 Match ID does not exist: %1
8080 Configuration ID (%1) and name (%2) do not match
8081 Missing bitstring
8082 Bad $List in %1
8083 Failed to build: %1
8084 Failed to start any worker processes
8085 Only a single Virtual Source ID is supported for this query
8086 Virtual Source %1 not found in this domain
8087 Dictionary element value is too long: %1
8088 Group with id %1 does not exist
8089 Source with external ID already exists: %1
8090 String too long: %1
8091 SkipList with name '%1' already exists
8092 Dictionary with name '%1' already exists
8093 SkipList with id %1 does not exist
8094 Failed to load the requested iKnow language data. This may be due to an insufficiently large gmheap setting.
8095 Cannot set domain parameter '%1' (either unknown or not user-configurable)
8096 Domain must be empty (no sources or entities) before parameter '%1' can be changed.
8097 iKnow is not available for this license
8098 Illegal result parameter value: %1 (should be either empty for output var or start with ^ for global output)
8099 STORE error while compiling query result. Either decrease page size or use global output.
8100 Gateway Request Failed: %1
8101 Gateway Request Exception: %1
8102 Gateway Request No Data: %1
8103 Gateway Request Timedout: %1
General Error Codes - 8200 to 8299
Error Code Description
8200 Maximum concept length must be positive.
8201 User has no permissions to write to the database
8202 Missing Lister Parameter at index %1 (%2)
8203 Invalid Lister Parameter at index %1 (%2): "%3"
8204 No Lister registered in this Loader instance. Use Loader.SetLister() first
8205 There is no User Dictionary with name "%1
8206 There is no User Dictionary with id %1
8207 User Dictionary with name "%1" already exists
8208 Invalid filter spec: "%1”
8209 Missing Relation Dominance in source %1
8210 Missing Proximity Field %1 in source %2
8211 %1 is not a valid Converter class
8212 %1 is not a valid Processor class
8213 Missing Concept Dominance in source %1
8214 Missing %1 Field %2 in source %3
8215 The supplied Matching Profile has not been saved since it was last modified
8216 A Matching Profile named "%1" does not exist in domain %2
8217 No sources can be added to a DeepSee-managed domain other than through DeepSee
8218 A Matching Profile named "%1" already exists
8219 "%1" is not a valid Matching Profile name (no colons allowed)
8220 This feature is only supported for domains in versions %1 or above
8221 This parameter has already been set to '%1' at the system level. Use UnsetSystemParameter() to clear it first
8222 Failed to acquire lock
8223 %1 object is modified, please save first.
8224 Domain parameter '%1' can only be changed at the namespace level if no non-empty domains exist in this namespace.
8225 Cannot change domain parameter '%1' to '%2'. Illegal value.
8226 Metric with ID %1 does not exist
8227 Metric '%1' does not exist
8228 Metric target '%1' with ID %2 does not exist
8229 Metric '%1' does not support target '%2'
8230 Domain %1 is managed by %2 and cannot be updated directly.
8231 %1 %2 is managed by %3 and cannot be updated directly.
8232 Internal error in iKnow Engine: %1
8233 At least one of the data structures required to resolve this query is not build or up-to-date. Please review your domain's build flags (%1).
8234 Failed to load iKnow language model. File: %1, Line: %2, '%3'
8235 The "system" domain only supports Virtual Sources
8236 This operation is not supported in the "system" domain
8237 The iKnow engine could not allocate enough memory to process the current document.
8238 Stemming is not enabled for this domain.
8239 Search string syntax error: brackets mismatch
General Error Codes - 8300 to 8599
Error Code Description
8300 No Pattern Argument
8301 ICU Regular Expression Error Number %1 (0x%2)
8310 Internal error in ICU regular expression library
8311 Syntax error in regexp pattern
8312 RegexMatcher in invalid state for requested operation
8313 Unrecognized backslash escape sequence in pattern
8314 Incorrect Unicode property
8315 Use of regexp feature that is not yet implemented
8316 Incorrectly nested parentheses in regexp pattern
8317 Decimal number is too large for ICU library
8318 Error in {min,max} interval
8319 In {min,max}, max is less than min
8320 Back-reference to a non-existent capture group
8321 Invalid value for match mode flags
8322 Look-Behind pattern matches must have a bounded maximum length
8323 Regexps cannot have UnicodeSets containing strings
8324 Octal character constant cannot be greater than 0377
8325 Missing closing bracket on a bracket expression
8326 In a character range [x-y], x is greater than y
8327 Regular expression backtrack stack overflow
8328 Maximum allowed match time exceeded
8329 Matching operation aborted by user callback fn
8351 Index, such as group number, is out of bounds
8352 Illegal argument, such as empty string for Pattern
8400 No file with GUID '%1'
8401 No file with name '%1'
8402 No file with name '%1' in '%2'
8403 Multiple files with name '%1'
8404 Multiple files with name '%1' in '%2'
8405 No file prior to '%1'
8406 No file prior to '%1' with prefix '%2'
8500 Error: '%1' in Line %2 at offset %3 (%4)
8501 Error: '%1' in Line %2 at offset %3 (%4)
General Error Codes - 8600 to 8899
Error Code Description
8600 Cannot return application license, session out of scope
8601 Invalid licensed application name
8602 Cannot open license key file '%1'.
8603 Not a valid license key file.
8604 License key has expired.
8605 License key is invalid.
8606 License key invalid for product version.
8607 This system (%1 Cores) exceeds permitted CPU core limit (%2) for IRIS.
8608 This system (%1 Cores) exceeds permitted CPU core limit (%2) for IRIS.
8609 License key platform (%1) invalid for this platform (%2).
8610 License keys are not accepted on a Single User (SU) platform.
8611 Licensed Application (%1), Keyword (%2) value (%3) is not a number.
8612 No license for Application (%1).
8613 Application connection count overflowed for user.
8700 XData Missing - class: %1 name: %2
8701 Dispatch Map Schema Validation Failed
8800 The notification is invalid
8801 The notification protocol '%1' is not supported
8802 The device token is invalid
8803 The APNS connection to %1 timed out after %2s
8804 The push notification attempt failed
8805 The push notification attempt failed: %1
8806 Invalid response from the APNS: %1
8807 Connection to %1:%2 failed
8808 The APNS terminated the connection
8809 Connection to %1 failed
8810 Unexpected HTTP status %1: '%2'
8812 The push notification attempt failed
8813 The push notification attempt failed: %1

Error Codes 9000 to 9999

General Error Codes - 9000 to 9299
Error Code Description
9000 Class (%1) is not up to date.
9001 Name: (%1) already exists.
9002 Class (%1) is generated.
9003 Class (%1) cannot be opened.
9004 Class (%1), method (%2) cannot be parsed.
9005 Class (%1) is deployed.
9100 Extent size must be a positive number '%1'.
9101 Global name '%1' for '%2' is too long, must be no more than %3 characters in length. (See Incompatibility HistoryOpens in a new tab)
9200 %1
9201 "%1" is not a valid option.
9202 "%1" is not a valid value for ImportTableExists option.
9203 Datatype "%1" is not supported for import columns.
9204 Table %1 already exists.
9205 Cannot acquire lock on table name "%1" in namespace %2.
9206 Syntax error in import table column specification.
9207 Syntax error: do not use keyword "AS" with SQL datatype name "%1".
9208 Datatype parameter "%1" is not supported.
9209 Datatype parameter "%1" is not supported for datatype %2.
9210 Cardinality "%1" is not supported.
9211 Time format %1 is not supported.
9212 Specified inverse relationship name "%1" conflicts with an existing property of class %2.
9213 Must specify inverse relationship name for relationship property %1.
9214 Option "%1" cannot be set at the connection level.
9215 Must connect before creating MapReduceResult.
9216 Must connect before executing command.
9217 Must connect before executing command.
9218 Cannot acquire lock needed to synchronize class %1.
9219 Cannot acquire lock needed to rollback checkpoint for class %1.
9220 No information available about synchronization job with ID %1.
General Error Codes - 9300 to 9400
Error Code Description
9300 Shard %1:%2:%3 returned error
9301 %1 shards returned errors
9302 Transaction with id "%1" has already been started
9303 Invalid transaction state transition: %1 to %2
9304 Invalid transaction state transition: %1 to %2
9305 Cannot open ECP connection to host %1 port %2
9306 Attempt to close ECP connection to host %1 port %2 failed
9307 Failed to create semaphore %1
9308 Cannot open TCP/IP connection to host %1 port %2
9309 Failed to delete semaphore %1
9310 Requested operation not supported for storage model %1
9311 Parallel load of %1 is already in progress
9312 %1 is not a sharded table
9313 No compiled shard-local class found for %1
9314 Class %1 has %2 storage definitions
9315 Shard namespace %1 on host %2 is mapped to remote host %3
9316 Cannot login user %1 to shard server at host %2, port %3
9317 Timed out waiting for lock to update mappings
9318 Connection to host %1 port %2 shard namespace %3 was reset, try operation again
9319 Current namespace %1 has no shards configured
9320 Current namespace %1 is not a shard
9321 Instance is not current primary failover member
9322 Namespace %1 has no shard %2
9323 No app server is assigned to shard %1 with hostname %2 port %3 namespace %4
9324 Invalid SQL statement
9325 Error allocating Id range, SQLCODE %d, SQL message: %2
9326 Cannot add shard while tables with user-defined shard keys exist
9327 Could not activate new shard%1, must call ActivateNewShards method
9328 Requested operation must be performed on host on which globals database of master namespace %1 resides
9329 Cannot create shard routines database path %1, internal error %2
9330 Cannot create shard routines database, .DAT database file already exists in %1
9331 Cannot create shard routine namespace %1, a namespace with that name already exists
9332 Cannot create shard routines database %1, a database with that name already exists
9333 No path defined for shard routines database %1
9334 No shard routine namespace defined for master namespace %1
9335 No shard routine namespace defined for master namespace %1
9336 Drop table: %1.%DeleteExtent() failed, %2 rows not deleted
9337 Authentication error: %1
9338 %1 is not enabled on shard %2:%3:%4
9339 Shard %1:%2:%3 does not allow incoming connections from IP address %4
9340 Hostname %1 cannot be translated to an IP address
9341 Message out of sequence, expected message code %1, got message code %2
9342 IP address %1 specified in connect request does not match startup IP address %2
9343 No hostname or IP address can be found for this system
9344 Master namespace %1 on primary mirror failover member is not mirrored
9345 Query shard cannot be mirrored
9346 Cannot deassign data shard while sharded tables exist
9347 Namespace %1 has no shard with hostname %2, port %3 namespace %4
9348 Shard count %1 for entity %2 is greater than total shard count %3
9349 Could not clean up deassigned shard %1:%2:%3
9350 Shard %1:%2:%3 has already been assigned
9351 Shard %1:%2:%3 has already been assigned to another master (%4:%5:%6))
9352 Shard %1 in namespace %2 has no query shard %3
9353 Namespace %1 has no shards configured
9354 Shard %1 failed verification
9355 %1 shards failed verification
9356 Query shard %1 of shard %2 failed verification
9357 %1 query shards failed verification
9358 Internal error: unrecognized message code %1
9359 MaxServers setting %1 too low, %2 needed
9360 MaxServerConn setting %1 too low, %2 needed
9361 MaxServers setting %1 and MaxServerConn setting %2 both too low, %3 needed
9362 Query shard mapped to wrong directory %1, should be %2
9363 Query shard mapped to wrong instance %1:%2, should be %3:%4
9364 Shard assigned with backup member address %1:%2 is not actually mirrored
9365 Shard assigned with backup member address %1:%2 is actually configured with backup member address %3:%4
9366 %1 is not a valid option
9367 %1 is not a valid value for option %2
9368 Master namespace %1:%2:%3 cannot be assigned as a shard
9369 Globals database for mirrored shard %1:%2:%3 must be mirrored
9370 Previous database for shard %1:%2:%3 must be dismounted before executing ReassignShard
9371 Sharding is not enabled in this version
9374 Timed out waiting for reply from job %1 on shard %2 %3:%4:%5
9375 Cannot read valid reply from shard %1, port number %2 may be incorrect
9376 Sharding service is not enabled on shard server
9377 ECP service is not enabled
9378 Instance requires restart because CPF file has been modified and not yet activated
9379 Current instance of version %1 cannot access sharded cluster of version %2
9380 Shard %1:%2:%3 version %4 cannot be assigned to sharded cluster of version %5
9381 Instance has been upgraded, $SYSTEM.Sharding.Upgrade() must be run in master namespace

Error Codes 15000 and Higher

General Error Codes - 15000 and Higher
Error Code Description
15414 The type of the index key property, '%3' in class '%1', index '%2', is not a serial type.
15511 SQL Map '%1' is conditional but condition is null.
15555 Incorrect string format in class %1, '%2' = %3.
16000 Line: '%1' Offset: '%2'.
16001 Couldn't open document '%1'.
16002 Invalid JSON Content.
16003 HTTP POST has no content.
16004 Unknown request type '%1'.
16005 Document '%1' does NOT exist.
16006 Document '%1' name is invalid.
16007 Couldn't parse debugger command '%1'.

Non-Numeric Error Codes

Miscellaneous Error Codes
Error Code Description
DisplayStringLoaderError DisplayStringLoader error '%1'
DisplayStringLoaderException DisplayStringLoader exception '%1'
DomainOrFilesEmpty The Domain or Files parameter(s) must not be empty
ERROR ERROR
ErrDisplayStringNotFound DisplayString undefined for Id='%1', domain='%2', language='%3'
ErrNoSaveMasterStrings Failed to save XData MasterStrings for MasterLanguage '%1' to file %2
MasterStringsNewer %1 XData MasterStrings are newer than strings in %2 - first difference = %3
MasterStringsOlder %1 Strings in %2 are newer than XData MasterStrings - first difference = %3
MessageDomainNotFound The domain specified in the domain parameter was not found in any message file
NoStatusCode (no error description)
OK OK
STATUS STATUS
UnknownStatusCode Unknown status code:
WARNING WARNING
XMLImportLocation (ending at line %1 character %2)
FeedbackOpens in a new tab